ID Tech IDWA-332312, Quick Start Manual

FCC WARNING STATEMENT  

This equipment has been tested and found to comply with the limits for a Class 

A digital device, pursuant to Part 15 of FCC Rules.  These limits are designed to 

provide reasonable protection against harmful interference when the equipment is 

operated in a commercial environment.  This equipment generates, uses, and can 

radiate radio frequency energy and, if not installed and used in accordance with 

the instruction manual, may cause harmful interference to radio communications.  

Operation of this equipment in a residential area is likely to cause harmful 

interference in which case the user is required to correct the interference at his 

expense. 

FCC COMPLIANCE STATEMENT 

This reader complies with Part 15 of the FCC Rules.  Operation of this reader is 

subject to the following conditions: this reader may not cause harmful interference 

and this reader must accept any interference received, including interference that 

may cause undesired operation.

CE STANDARDS  

An independent laboratory performed testing for compliance to CE requirements.  

The unit under test was found compliant to Class A.

ID TECH is a registered trademark of International Technologies & Systems Cor-

poration.  Workshop and Value through Innovation are trademarks of International 

Technologies & Systems Corporation. 

USB (Universal Serial Bus) Specifi cation is Copyright by Compaq Computer Cor-

poration, Intel Corporation, Microsoft Corporation, NEC Corporation.  Windows, 

Excel, & Notepad are registered trademarks of Microsoft Corporation.

Copyright © 2008, International Technologies & Systems Corporation.  All Rights 

Reserved

TROUBLE SHOOTING

Refer to the installation instructions for Reader-Writer and for Workshop troubling 

shooting information.  The RS232 or USB-RS232 operation has little Windows setup; 

however, review of the communication parameters may be necessary to insure the 

correct baud rate, parity, etc. 

MODEL NUMBER TABLE

The models of the Magnetic Stripe Reader-Writer are available from ID TECH:

  IDWA-332312      RS-232, Track 1 & 2            Hi/Lo Coercivity, Metal housing

  IDWA-332333      RS-232, Track 1, 2 & 3        Hi/Lo Coercivity, Metal housing

  IDWA-336312      USB, Track 1 & 2                 Hi/Lo Coercivity, Metal housing

  IDWA-336333      USB, Track 1, 2 & 3             Hi/Lo Coercivity, Metal housing

  IDWA-332112B   RS-232, Track 1 & 2             Lo Coercivity, Molded housing

  IDWA-332133B   RS-232, Track 1, 2 & 3         Lo Coercivity, Molded housing

  IDWA-336112B   USB, Track 1 & 2                 Lo Coercivity, Molded housing

  IDWA-336133B   USB, Track 1, 2 & 3             Lo Coercivity, Molded housing

  IDWA-336133B   USB, Track 1, 2 & 3             Lo Coercivity, Molded housing

  IDWA-332312      RS-232, Track 1 & 2            Hi/Lo Coercivity, Metal housing

  IDWA-332333      RS-232, Track 1, 2 & 3        Hi/Lo Coercivity, Metal housing

  IDWA-336312      USB, Track 1 & 2                 Hi/Lo Coercivity, Metal housing

  IDWA-336333      USB, Track 1, 2 & 3             Hi/Lo Coercivity, Metal housing

  IDWA-332112B   RS-232, Track 1 & 2             Lo Coercivity, Molded housing

  IDWA-332133B   RS-232, Track 1, 2 & 3         Lo Coercivity, Molded housing

  IDWA-336112B   USB, Track 1 & 2                 Lo Coercivity, Molded housing

  IDWA-336133B   USB, Track 1, 2 & 3             Lo Coercivity, Molded housing

  IDWA-332312      RS-232, Track 1 & 2            Hi/Lo Coercivity, Metal housing

  IDWA-332333      RS-232, Track 1, 2 & 3        Hi/Lo Coercivity, Metal housing

  IDWA-336312      USB, Track 1 & 2                 Hi/Lo Coercivity, Metal housing

  IDWA-336333      USB, Track 1, 2 & 3             Hi/Lo Coercivity, Metal housing

  IDWA-332112B   RS-232, Track 1 & 2             Lo Coercivity, Molded housing

  IDWA-332133B   RS-232, Track 1, 2 & 3         Lo Coercivity, Molded housing

  IDWA-336112B   USB, Track 1 & 2                 Lo Coercivity, Molded housing

  IDWA-336133B   USB, Track 1, 2 & 3             Lo Coercivity, Molded housing

  IDWA-332112B   RS-232, Track 1 & 2             Lo Coercivity, Molded housing

  IDWA-332112B   RS-232, Track 1 & 2             Lo Coercivity, Molded housing

  IDWA-332112B   RS-232, Track 1 & 2             Lo Coercivity, Molded housing

  IDWA-332112B   RS-232, Track 1 & 2             Lo Coercivity, Molded housing

  IDWA-332112B   RS-232, Track 1 & 2             Lo Coercivity, Molded housing

  IDWA-332133B   RS-232, Track 1, 2 & 3         Lo Coercivity, Molded housing

  IDWA-332133B   RS-232, Track 1, 2 & 3         Lo Coercivity, Molded housing

  IDWA-332133B   RS-232, Track 1, 2 & 3         Lo Coercivity, Molded housing

  IDWA-332133B   RS-232, Track 1, 2 & 3         Lo Coercivity, Molded housing

  IDWA-332133B   RS-232, Track 1, 2 & 3         Lo Coercivity, Molded housing

6

6

FCC WARNING STATEMENT  

This equipment has been tested and found to comply with the limits for a Class 

A digital device, pursuant to Part 15 of FCC Rules.  These limits are designed to 

provide reasonable protection against harmful interference when the equipment is 

operated in a commercial environment.  This equipment generates, uses, and can 

radiate radio frequency energy and, if not installed and used in accordance with 

the instruction manual, may cause harmful interference to radio communications.  

Operation of this equipment in a residential area is likely to cause harmful 

interference in which case the user is required to correct the interference at his 

expense. 

FCC COMPLIANCE STATEMENT 

This reader complies with Part 15 of the FCC Rules.  Operation of this reader is 

subject to the following conditions: this reader may not cause harmful interference 

and this reader must accept any interference received, including interference that 

may cause undesired operation.

CE STANDARDS  

An independent laboratory performed testing for compliance to CE requirements.  

The unit under test was found compliant to Class A.

ID TECH is a registered trademark of International Technologies & Systems Cor-

poration.  Workshop and Value through Innovation are trademarks of International 

Technologies & Systems Corporation. 

USB (Universal Serial Bus) Specifi cation is Copyright by Compaq Computer Cor-

poration, Intel Corporation, Microsoft Corporation, NEC Corporation.  Windows, 

Excel, & Notepad are registered trademarks of Microsoft Corporation.

Copyright © 2008, International Technologies & Systems Corporation.  All Rights 

Reserved

TROUBLE SHOOTING

Refer to the installation instructions for Reader-Writer and for Workshop troubling 

shooting information.  The RS232 or USB-RS232 operation has little Windows setup; 

however, review of the communication parameters may be necessary to insure the 

correct baud rate, parity, etc. 

MODEL NUMBER TABLE

The models of the Magnetic Stripe Reader-Writer are available from ID TECH:

  IDWA-332312      RS-232, Track 1 & 2            Hi/Lo Coercivity, Metal housing

  IDWA-332333      RS-232, Track 1, 2 & 3        Hi/Lo Coercivity, Metal housing

  IDWA-336312      USB, Track 1 & 2                 Hi/Lo Coercivity, Metal housing

  IDWA-336333      USB, Track 1, 2 & 3             Hi/Lo Coercivity, Metal housing

  IDWA-332112B   RS-232, Track 1 & 2             Lo Coercivity, Molded housing

  IDWA-332133B   RS-232, Track 1, 2 & 3         Lo Coercivity, Molded housing

  IDWA-336112B   USB, Track 1 & 2                 Lo Coercivity, Molded housing

  IDWA-336133B   USB, Track 1, 2 & 3             Lo Coercivity, Molded housing

  IDWA-332312      RS-232, Track 1 & 2            Hi/Lo Coercivity, Metal housing

  IDWA-332333      RS-232, Track 1, 2 & 3        Hi/Lo Coercivity, Metal housing

  IDWA-336312      USB, Track 1 & 2                 Hi/Lo Coercivity, Metal housing

  IDWA-336333      USB, Track 1, 2 & 3             Hi/Lo Coercivity, Metal housing

  IDWA-332112B   RS-232, Track 1 & 2             Lo Coercivity, Molded housing

  IDWA-332133B   RS-232, Track 1, 2 & 3         Lo Coercivity, Molded housing

  IDWA-336112B   USB, Track 1 & 2                 Lo Coercivity, Molded housing

  IDWA-336133B   USB, Track 1, 2 & 3             Lo Coercivity, Molded housing

  IDWA-332312      RS-232, Track 1 & 2            Hi/Lo Coercivity, Metal housing

  IDWA-332333      RS-232, Track 1, 2 & 3        Hi/Lo Coercivity, Metal housing

  IDWA-336312      USB, Track 1 & 2                 Hi/Lo Coercivity, Metal housing

  IDWA-336333      USB, Track 1, 2 & 3             Hi/Lo Coercivity, Metal housing

  IDWA-332112B   RS-232, Track 1 & 2             Lo Coercivity, Molded housing

  IDWA-332133B   RS-232, Track 1, 2 & 3         Lo Coercivity, Molded housing

  IDWA-336112B   USB, Track 1 & 2                 Lo Coercivity, Molded housing

  IDWA-336133B   USB, Track 1, 2 & 3             Lo Coercivity, Molded housing

  IDWA-332112B   RS-232, Track 1 & 2             Lo Coercivity, Molded housing

  IDWA-332112B   RS-232, Track 1 & 2             Lo Coercivity, Molded housing

  IDWA-332112B   RS-232, Track 1 & 2             Lo Coercivity, Molded housing

  IDWA-332112B   RS-232, Track 1 & 2             Lo Coercivity, Molded housing

  IDWA-332112B   RS-232, Track 1 & 2             Lo Coercivity, Molded housing

  IDWA-332133B   RS-232, Track 1, 2 & 3         Lo Coercivity, Molded housing

  IDWA-332133B   RS-232, Track 1, 2 & 3         Lo Coercivity, Molded housing

  IDWA-332133B   RS-232, Track 1, 2 & 3         Lo Coercivity, Molded housing

  IDWA-332133B   RS-232, Track 1, 2 & 3         Lo Coercivity, Molded housing

  IDWA-332133B   RS-232, Track 1, 2 & 3         Lo Coercivity, Molded housing