background image

FCC WARNING STATEMENT 

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference when 
the equipment is operated in a commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential 
area is likely to cause harmful interference in which case the user will be 
required to correct the interference at his expense. 

FCC COMPLIANCE STATEMENT 

This device complies with Part 15 of the FCC Rules. Operation of this device 
is subject to the following conditions: this device may not cause harmful 
interference and this device must accept any interference received, including 
interference that may cause undesired operation. 

CANADIAN DOC STATEMENT 

This digital apparatus does not exceed the Class B limits for radio noise for 
digital apparatus set out in the Radio Interference Regulations of the Cana-
dian Department of Communications. 
Le présent appareil numérique n’émet pas de bruits radioélectriques dépas-
sant les limites applicables aux appareils numériques de las classe A prescrites 
dans le Réglement sur le brouillage radioélectrique édicté par les ministère 
des Communications du Canada. 

CE STANDARDS 

Testing for compliance to CE requirements was performed by an independent 
laboratory. The unit under test was found compliant to Class B.

Summary of Contents for VERSAKEY

















Reviews: