ClearMark™
Installation, Operation & User Manual
–
Page 90
V 1.S.10 January 2021
V-1.S.1
Configuring printer to use message settings rather than global settings
This function allows saving printer configuration parameters within the message so multiple
parameters can be created and saved to a specific message rather than using global parameters.
Once activated, the printer configuration changes depending on the current selected message
and what parameters are set within each message file.
The parameters that can be locally saved to the messages are those related with the print
procedure: photocell and speed/encoder setup, resolution, print delay …
Once this feature is activated, if the current message has printer settings embedded in it, the
printer will be configured automatically with the parameters written and saved to that local
message.
Printer settings loaded from the message is a parallel/temporally printer configuration. In any
case, these message settings will not overwrite the printer setup configured globally in the
machine.
If any of the parameters in the message are missing, they will be configured based on the existing
global settings.
Saving the printer configuration parameters within a message file:
To save the printer settings in a message, follow these steps:
1.
Create or edit a message.
2.
In the editor tap on “General message settings” and tap on “Configure printer settings”
