16
4.2.2 Timer Recording
Timer recording provides two periods of time each day in a weekly table which programs the DVR to
turn on and off at specified times. This way the DVR will start and stop recording according to the
programmed schedule. Please take the following steps to program the scheduled recording.
(1) Press the
SETUP
button
to enter the
MAIN MENU
.
(2) Select the
RECORD TIMER
and press the
ENTER/SAVE
button
to enter the
RECORD TIMER
page
.
(3) Select the
TIMER
－
SET
.
(4) Press the
ENTER
/
SAVE
ENTER/SAVE
button
to enter the
REC SCHEDULE
table.
(5) Use the
button and the
button
to locate the specific day/hour/minute and use the
button and the
button
to set the day/hour/minute you wish. The time is displayed in
a 24-hour clock format.
(6) After scheduling is completed, press the
ENTER
/
SAVE
ENTER/SAVE
button
and set
OK
to save the
setting or select
CANCEL
to leave the page without saving the settings.
(7) To activate the programmed recording schedule, set the
REC ENABLE
to
ON
. As the scheduled
recording is on, the red indicator of the Timer Record will be on as well. To deactivate it, set to
OFF
.
(8) Press the
STOP
button
during the scheduled recording to stop it at any time. If you wish to
continue the scheduled recording, press the
REC
button
to proceed.
NOTE: You can proceed to start the scheduled recording from the current time if it is in the
scheduled interlude as soon as setting is completed. Press the REC button to proceed.
NOTE: If you activate the recording function before the scheduled recording, the unit will
operate recording as showed the diagram below and keep those Images in different
files.
03:00 06:00 08:00 12:00 14:00
START END START END
Start Manual
Recording
Timer
Manual
Timer
Manual
Summary of Contents for IV-100CD
Page 2: ......
