48
1.3 View DVR Video From A Remote PC
Follow the instructions below to use the Network Viewer to browse a DVR video from a remote location.
Upon entering the Network Viewer; the connection box will appear as follows.
1. Choose a channel number from the Channel drop-down list.
2. Assign a name for the chosen DVR.
3. Type in the password and IP of the device and click
Add
tag to add the device to the connection list.
4. Click
the
Connect
tag to establish the connection between devices and the computer. To begin viewing
images, click OK.
NOTE: Upon connection, the connection status box indicates the name and IP address of the
selected device. If unable to connect, a “Fail” message appears on the screen right after the
device IP address; otherwise an “OK” appears. To add more connections or units of the DVR,
please repeat the above instructions.
Functions
Description
Channel
Assign a display location when you have multiple devices connected.
Name
This box allows you to assign a name to the chosen device.
Password
Type the preset password for making a connection.
URL of the Remote Device
Type the IP address which you preset for the device
URL of a Proxy
Type your proxy server address when accessing the Internet via a proxy
server.
Port
Enter the designated port setting of your proxy server.
Modify
Click to change the settings of a chosen device.
Delete
Click to remove the connection of a chosen device
Connect
Click to establish the connection between devices and the computer.
OK
Click to access the display page of the Network Viewer
Cancel
Click to exit the program of the Network Viewer.
Summary of Contents for IV-100CD
Page 2: ......
