3 Installation
Thermal Imaging Integrated Network Camera
User Manual
8
Issue V1.0 (2014-01-10)
Step 3
Fix the installation base on the wall, as shown in Figure 3-2.
Figure 3-2
Fixing base
Step 4
Hang the integrated camera into the base along the guide slots and rotate it to a certain
angle to facilitate cable connection, as shown in Figure 3-3.
Figure 3-3
Hanging the integrated camera into the base
Step 5
Connect and conceal the cables for the integrated camera. After the cable connection is
complete, rotate the integrated camera to align at the installation base, as shown in
Figure 3-4.
Summary of Contents for IV-THM42F25
Page 2: ......