3 Installation
Thermal Imaging Integrated Network Camera
User Manual
10
Issue V1.0 (2014-01-10)
Figure 3-6
Focusing
Focusing fixture
Step 8
Adjust the surveillance angle, as shown in Figure 3-7, and then fix the screws.
Figure 3-7
Adjusting the surveillance angle
1. Loosen the screws 1, and adjust the part 1 along the arrow direction.
The adjustment angle is 360 degrees.
1. Loosen the screws 2, and adjust the part 2 along the arrow direction.
The adjustment angle is 90 degrees.
1. Loosen the screws 3, and adjust the part 3 along the arrow direction.
The adjustment angle is 360 degrees.
Screws 1
Screws 2
Screws 3
----End
Summary of Contents for IV-THM42F25
Page 2: ......