6
RECHARGING THE INTERNAL BATTERY
After prolonged use, the internal battery will become weak and the operation may become intermittent.
When the internal battery charge is low, the
BATTERY INDICATOR
will show “ON and FLASH”
alerting you to recharge the internal battery as soon as possible.
Note:
1. Charging time will vary if you are listening to music while charging the internal battery. We
recommend you switch off the unit power during the charging process.
2. To prolong the life of a rechargeable battery, it is recommended to completely discharge it
before fully charging it again.
3. Rechargeable batteries need to be cycled for maximum performance and longer battery life.
If you don’t use the player that often, be sure to recharge the battery at least once a month in
order to keep the internal battery working properly.
Battery Note and Care
Do not burn or bury batteries.
Do not puncture or crush.
Do not disassemble.
Do not dispose of batteries in fire, batteries may explode or leak
Li-ion batteries must be recycled. Do not dispose of in the trash.
Use only chargers rated for Li-ion cells. Be sure the charger’s voltage and current settings are
correct for the battery pack being charged.
Charge batteries on a fireproof surface and away from flammable items or liquids.
Batteries should NEVER be left unattended while charging. Only adults should charge the
batteries.
Follow the manufacturer’s instructions for charging the product and do not charge longer than
recommended. Unplug the charger when the battery is charged or not in use.
Bluetooth operation
Pairing a Bluetooth Device for the First Time
1. Slide
the
POWER ON/OFF
switch on the rear of the unit to ON to turn on the unit. The
PAIR
INDICATOR
will light blue and a sound “iDance CUBE mini, Bluetooth on
”
is heard. The PAIR
INDICATOR is flash light and ready to pair (link) with your Bluetooth device.
Make sure no audio cable is connected to AUX IN Jack.
When pairing, remain within 3 feet of the unit.
2. Using the native controls on your Bluetooth device, select the
CM1
in your Bluetooth settings to
pair. If your device requests a password, enter the default password “0000”.
Refer to the user’s manual for your specific device for instructions on pairing and connecting
Bluetooth devices.
3. When successfully paired and connected, a
sound “Bluetooth mode” will issue from the unit, the
PAIR INDICATOR
will remain lit.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased
