Troubleshooting
SPECIFICATIONS
If you have followed the instructions and are having difficulty operating the unit, locate the PROBLEM in the left
column below. Check the corresponding POSSIBLE CAUSE AND SOLUTION column to locate and fix the problem.
PROBLEM
POSSIBLE CAUSE AND SOLUTION
Noise on speaker output when
microphone is connected and turn on
XD25
Make sure your microphone or microphone cable is in good condition,
grounded and shielded. Internal gain of voice processing could cause
vibration from poor ground noise.
Bluetooth cannot connect to XD25
•
Make sure no other device from your friend or family is connected
to XD25. When XD25 Bluetooth is connected, press BLUETOOTH
button would stay ON. So make sure XD25 indicating Bluetooth
is ready to connect. Also make sure your smartphone / tablet is
located close to XD25 less than 2 meters when pairing.
•
Hold the BLUETOOTH button to reconnect again.
Intermittent Bluetooth music streaming The wireless Bluetooth distance of XD25 is about 7-l0 meter in open
area. Below conditions could block you Bluetooth signal and please
ensure you would get rid of those:
•
Metal protection on case for your phone/tablet
•
Metal or wall is blocking in between your phone / tablet and XD25
•
Another Bluetooth device is working close to XD25
No sound on selected source
•
Ensure that the XD25 is powered ON
•
Check the master volume on the XD25
•
Check the volume level on paired Bluetooth device
•
Remove the power adapter / connection cable and reconnect
again.
AC ADAPTER
AC Input :AC~ 100-240V 50/60Hz
DC Output = 15V , 2000mA
USB Output
DC Output = 5V, 1A
SOUND SOURCE INPUT
Bluetooth, Aux in, Microphone
Total Harmonic Distortion
Below 10%
Signal to Noise Ratio
Over 41dB
Master Power Output
13W X 2 RMS
Speaker
4 Inch 8 Ohm 20 W
EN5
