iDance XD3, Instruction Manual

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE AND SOLUTION

Noise on speaker output when 

microphone is connected and turn on 

voice changer.

Make sure your microphone or microphone cable is in 

good condition, grounded and shielded. Internal gain of 

voice processing could cause vibration from poor ground 

noise 

Bluetooth cannot connect to XD3

Make sure no other device from your friend or family is 

connected to XD3. When XD3 Bluetooth is connected, LED 

ring on Play/Pause button would stay ON. 

So make sure XD3 Play/Pause button LED ring is blinking 

and indicating Bluetooth is ready to connect. Also make 

sure your smartphone / tablet is located close to XD3 

(<2m) when pairing.

Distortion on recording

XD3 USB recorder is capturing  audio signals on master 

output, please make sure microphone/guitar volume, jingle 

volume and master volume are at optimal level and no 

distortion is heard from speaker.

No music from Phone output, and not 

muting the speaker

No sound on selected source

XD3 phone output is for DJ CUE monitoring, but NOT for 

private listening. Please refer to above page E4 for the 

phone output operation.

Ensure that the XD3 is powered ON 

Ensure fader control is in the correct position for 

listening to the desired source

Check the master volume on the XD3

Check the volume level on paired Bluetooth device   

Intermittent Bluetooth music 

streaming

The wireless Bluetooth distance of XD3 is about 7-10m in 

open area. Below conditions could block you Bluetooth 

signal and please ensure you would get rid of those:

Metal protection case for your phone/tablet

Metal or wall is blocking in between your phone/tablet 

and XD3

Another Bluetooth device is working close to XD3

E7