TyPe 8 - wiring diagram
XX-XX
PAGE X-X
nOTiCe
This product is protected by one or more of the following patents
:
U.S. LeTTerS PaTenT nO.
5,719,551; 6,011,460; 6,243,004; 6,249,216; 6,275,147; 6,297,731; 6,346,876; 6,392,534; 6,529,124; 6,696,927; 6,756,885; 6,756,886; 6,771,167; 6,812,829; 6,924,750;
7,010,402; 7,031,826; 7,046,126; 7,061,137; 7,068,153; 7,015,830; 7,205,679; 7,224,083; 7,369,936; 7,378,945; 7,489,233; 7,501,937;
Canadian PaTenT nO.
2,320,248; 2,415,023; 2,426,670; 2,414,991; 2,415,011; 2,415,027; 2,415,038; 2,415,041; 2,502,893; 2,451,490;
2,452,296; 2,451,487;
eUrOPean PaTenT nO.
1,053,128;
de
69807-941T2;
U.S.
20020145535; 20060129282; 20060129284; 20040017284; 20080030316; 20090079552;
eP
1500565; 1538038; 1538037;
PATENT
PAGE X-X
Page 11 of 19
ADS-TBSL-PL
20110120
install guide
guides Français disponibles au www.idatalink.com
www.idatalink.com/support
automotive data solutions inc. © 2011
Transponder Bypass
PASSLOCK
MOVE THE FOLLOWING ITEMS IN YOUR
SCHEMATIC WITH ALL LAYERS ON
USE THE FOLLOWING LAYER SPECIFIC ITEMS AS
WIRING AND TEXT TEMPLATES
IDATALINK (RS232) PORT REQUIRED
ON REMOTE STARTER. IF UNAVAILABLE
USE STANDARD WIRING METHOD
LEGEND
Wiring connections not required
when installed in iDatalink mode
* Wiring connection not required in
2-way iDatalink
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CONNECT TO PIN #1 OF OBDII
CONNECTOR LOCATED UNDER
DRIVER SIDE DASHBOARD
BLUE/RED - ACCESSORY INPUT (+)
BLUE/YELLOW - BCM SIDE
GREEN/RED (NC)
GREEN/YELLOW - VEHICLE SIDE
GRAY/RED - PASSLOCK
GRAY/YELLOW - GROUND
ORANGE - DATA (SWC)
PINK/BLACK (NC)
PINK - IGNITION INPUT
WHITE/BLA
CK - P
ASSL
OCK KEY SIDE
WHITE/RED - P
ASSL
OCK VEHICLE SIDE
WHITE (NC)
RED - 12V
BLACK - GROUND
NO WIRE (NC)
BLUE/WHITE - GROUND-OUT WHEN RUNNING
REMOTE
STARTER
PINK OR YELL
OW
MAIN IGNITION HARNESS CONNECTOR
LOCATED AT IGNITION BARREL
WHITE
BRO
WN
CONNECT EITHER
IDATALINK
OR
STANDARD WIRING
IDATALINK
NOTE
STANDARD 12 VOLT, IGNITION AND ACCESSORY
STILL REQUIRED FROM THE REMOTE STARTER.
MULTIPLEX CIRCUIT IS CONTROLLED FROM
MODULE USING DATA, THEREFORE NO ADDITIONAL
RELAYS OR RESISTORS REQUIRED.
NOTE
STANDARD 12 VOLT, IGNITION AND ACCESSORY
STILL REQUIRED FROM THE REMOTE STARTER.
MULTIPLEX CIRCUIT IS CONTROLLED FROM
MODULE USING DATA, THEREFORE NO ADDITIONAL
RELAYS OR RESISTORS REQUIRED.
NOTE
STANDARD 12 VOLT, IGNITION AND ACCESSORY
STILL REQUIRED FROM THE REMOTE STARTER.
MULTIPLEX CIRCUIT IS CONTROLLED FROM
MODULE USING DATA, THEREFORE NO ADDITIONAL
RELAYS OR RESISTORS REQUIRED.
NOTE
STANDARD 12 VOLT, IGNITION AND ACCESSORY
STILL REQUIRED FROM THE REMOTE STARTER.
MULTIPLEX CIRCUIT IS CONTROLLED FROM
MODULE USING DATA, THEREFORE NO ADDITIONAL
RELAYS OR RESISTORS REQUIRED.
NOTE
STANDARD 12 VOLT, IGNITION AND ACCESSORY
STILL REQUIRED FROM THE REMOTE STARTER.
MULTIPLEX CIRCUIT IS CONTROLLED FROM
MODULE USING DATA, THEREFORE NO ADDITIONAL
RELAYS OR RESISTORS REQUIRED.
18
72
1
55
C2
18
72
1
55
C2
GREEN
PIN #11 D
ARK GREEN
Doc. No.: ##4684##
