Copyright © 2008 IDC Design Corporation. All Rights Reserved.
8
TM
Optional: Change Distance Unit System
You have the option to change the distance unit
system from English [feet (ft)/miles (mi)] to metric
[meters (m)/kilometers (km)] or back again.
1. While
Ecco
is in
Ready
mode, press and hold
location
3
(
e6
) for 3 seconds through a
sequence of messages:
Hold to change units
>
Units set to meters
[
feet
].
2. Release
location
3
(
e6
). The LCD message
Ready
appears.
Note:
Repeat the previous steps to change back.
Navigating with
Ecco
Store a Location
1. While
Ecco
is in
Ready
mode, press
lock
button
(
e3
). The LCD message
Select loca-
tion
appears.
2. Press
location
#
(
e6
) to store your current
position; then the message
Location # locked
appears. Proceed to your destination.
Note:
After 1 minute,
Ecco
goes to
Sleep
, but your
stored location will not be lost. It will remain in
memory until it is replaced with a new locked posi-
tion. (See “Sleep Versus Off” on page 9.)
Return to a Location
1. To wake
Ecco
from
Sleep
, press
Power
for 1
second or until the LCD backlight comes on. The
LCD message
Ready
appears.
2. To navigate to:
• Last-locked position: simply press
return
button
(
e4
).
• Another stored position: press
return
button (e4)
and
location
#
(
e6
).
