Ideal AKE AKV Series Operating Manual Download

Page: 107 / 168

Subject to technical changes | Valid from July 2021

REFRIGERATED DISPLAY CASES

All units must only be transported and stored in the position of use (horizontal). Units with propane (R290) or other
combustible and/or explosive refrigerants must be transported and handled observing the points stated in Chapter 1.9.
All the safety instructions in Chapter 1.8 must also be complied with.

NOTE

1.16.

TRANSPORT AND PACKAGING

The design of the packaging is dependent on the quote issued, and is designed individually by agreement. By default the units are
transported with wood cladding which protects the units against major damage. Glass shelf supports are secured on the left and
right with L-shaped transport locks. Components made of glass are wrapped additionally with packaging material. Moving parts
and glass shelves are provided with an additional covering of packaging material. All parts are positioned and taped safely for
transport inside this wood cladding.

Danger from falling objects and suspended loads during transport of the units and their components

Use adequately dimensioned lashing and clamping devices. When securing the load, observe the permissible vehicle
provisions. The statutory traffic laws of the specific country must be obeyed. Any load-lifting equipment that is used,
e.g. forklifts, must be adequately dimensioned. During lifting processes, ensure that nobody is underneath the loads
being transported while raised. The unit may only be transported upright (in the position of use).

WARNING

Danger of crushing against stationary structural elements (walls, other machines) when positioning the units, as well as
danger of crushing between the pallet and ground when putting the unit down

Keep yourself and other persons away from the hazardous area. Call in another person for spotting if necessary. When
putting units down, be aware of the danger of crushing for third parties. Wear protective gloves, safety shoes and a
hardhat for installation and loading work.

Danger from falling objects when lifting and unpacking the units

When removing the wood cladding, be aware of possible dangers from wooden parts which might snap out. Get ano

ther person to help you if necessary. The unit must be lifted with suitable load-lifting equipment, for example a forklift.
Manual lifting of the unit must be carried out by at least four persons, who must be sufficiently strong. Wear protective
gloves, safety shoes and a hardhat for installation and loading work.

WARNING

NOTE

In the event of a return shipment, the unit must be packed in the original packaging or in the same way, in a suitable manner for
transport. Furthermore, the unit must be delivered unused, undamaged and complete. The return shipment must be commissi

oned and paid for by the customer. Information on the correct disposal of the packaging material can be found in Chapter 1.17.

All units must only be transported and stored in the position of use (horizontal). To ensure that damage caused du

ring loading, transport and unloading is traceable, all units are equipped with a “ShockWatch® 2”. This tool makes it
possible to determine at which point of the delivery chain a product was damaged, in order to clarify transport dama

ge. Information on the ShockWatch® concept is stored in the QR code (see Chapter 4.1) and on the manufacturer’s
website.