Ideal AKE AKV Series Operating Manual Download

Page: 115 / 168

Subject to technical changes | Valid from July 2021

REFRIGERATED DISPLAY CASES

Units without their own cooling unit must be installed exclusively by an authorised refrigeration company.

NOTE

All units are equipped with coated fin coil evaporators. The connection pipes lead out downwards through the foamed refrigerated
well. All pipes are installed and insulated. Units that are configured with gas dampers for the opened position of the fin coil evapo

rator must be checked monthly to ensure they are working (depending on the model).

2.3.2. REFRIGERATION-RELATED INFORMATION

Solenoid valves, filter dryers and if applicable back pressure regulators must be installed by the customer.

NOTE

Various dangers when disposing of refrigerants

When disposing of refrigerants (propane, R404A, R134A etc.), wear protective gloves and safety glasses. Working with open
flames is forbidden during the disposal of refrigerant. Dispose of the refrigerant properly and in an environmentally compatible
way. The laws of the specific country must be observed.

Various dangers during the disposal of damaged parts/components

When disposing of damaged parts/components, wear protective gloves. Dispose of damaged parts/components properly
and in an environmentally compatible way. The laws of the specific country must be observed.

On self-contained units, the pipework is attached permanently to the refrigeration unit, and the refrigeration
circuit is filled with refrigerant. Display cases with expansion valves and those above a specific size have an
inspection glass with a moisture indicator (for checking during servicing). This is located beside the con

denser. There is no inspection glass for self-contained units with propane (R290) as a refrigerant.

Self-contained units

Remote refrigeration units are intended for connection to an existing refrigeration plant provided by the customer. The copper
tubing is insulated and leads out downward through the foamed refrigerated well with convection cooling. The evaporators are
equipped with an expansion valve for the desired refrigerant and filled with dry nitrogen. The specified evaporation temperatures
and the condensing temperatures must be kept constant. Steam components must be avoided in front of the expansion valve.

Remote refrigeration units

WARNING

All work, installations, deliveries and services may only be carried out by authorised refrigeration companies and qualified speci

alists. The state of the art, relevant legal provisions, regulations and guidelines of authorities, professional and trade associations
must be complied with. The installed refrigeration system must be put into operation and a functional and safety test performed.
The report must be submitted to the operator.

Connection work

For servicing purposes, the refrigeration system including the stainless steel housing can be pulled out

to the front (customer side).

Do not pull or damage the lines behind it.

CAUTION