59
GEAR SHIFT SYSTEM
27 Operating elements
1
2
3
1
Twist-grip shifter
2
Rear shift lever
3
Front shift lever
Fig. 14:
Gear shift controls
*
* Pedelecs with electronic gear shift system, see
˃ Chap. 30 "Electronic gear shift system" on page
28
Derailleur system
4
5
6
1
3
2
1
Chain
2
Chain ring (1-3)
3
Front derailleur
4
Gear cable
5
Sprocket
6
Rear derailleur
Fig. 15:
Derailleur system components
28.1
Method of operation
Depending on the model, a pedelec with a derailleur system is fitted with 1 to 3 chain rings
of different sizes at the same height as the pedals and 7 to 12 sprockets of different sizes at
the rear wheel hub.
The different combinations of chain rings and sprockets over which the chain can run create
the different gears (chain "transmission").
High transmission (more effort/lower pedalling frequency):
If the chain is running over one of the smaller sprockets, pedalling is harder, but the pedelec
covers a longer distance for each pedal rotation.
Low transmission (less effort/high pedalling frequency):
If the chain is running over one of the larger sprockets, pedalling is easier, but the pedelec
covers a shorter distance for each pedal rotation.
The required gear is selected using 1 or 2 operating elements on the handlebar, depending
on the configuration.
Summary of Contents for PRISMA-810
Page 1: ...BMIEEN22V01 Original Instructions EN 15194...
Page 99: ...99 NOTES...
Page 100: ...BMIEEN22V01...
