71
SADDLE
Clamp with clamp screw
1
1
Clamp with clamp screw
Fig. 19:
Adjusting the saddle height (clamp with clamp screw)
1. Turn the clamp screw in an anti-clockwise direction until the seat post can be moved
in the seat tube.
2. Adjust the seat post to the required height.
-
When doing this, observe the minimum insertion depth of the seat post.
3. Once you have adjusted the saddle to the correct height, align the saddle in a straight
line with the frame.
4. To secure the saddle in position, turn the clamp screw in a clockwise direction and
tighten.
-
When doing this, observe the torque of the clamp screw
.
5. Check whether the saddle can be rotated.
-
If you can rotate the saddle, check the seat post clamp.
34.2 Adjusting the saddle position
1
1
1
Screws
Fig. 20:
Adjusting the saddle position
1. Release the screws on the seat post in an anti-clockwise direction.
2. Tilt and move the saddle to the desired position.
3. To secure the saddle in position, tighten the screws on the seat post in a clockwise
direction.
-
When doing this, note the torque of the screws
4. Check whether the saddle can be rotated.
-
If the saddle can be rotated, contact your specialist dealer.
Summary of Contents for PRISMA-810
Page 1: ...BMIEEN22V01 Original Instructions EN 15194...
Page 99: ...99 NOTES...
Page 100: ...BMIEEN22V01...
