26
Mexico Super CF 3/60P - 3/140P -
Installation
SERVICING
41 PILOT BURNER REPLACEMENT - CF 3/100P, CF 3/125P & CF 3/140P ONLY
1.
Lift off the front door. Refer
to Frame 28.
2.
Pull off the thermostat knob.
3.
Remove the 2 screws and
pull down the control panel
tabs clear of the top panel.
4.
Remove the thermostat
phial from the pocket - refer
to Frame 28.
5.
Remove the bottom self
tapper and remove the
cover.
6.
Remove the top self tapper
and ease the control box off
the control panel.
7.
Remove the 2 self tappers
to release the thermostat
bracket.
8.
Disconnect the electrical
leads.
9.
Unscrew the thermostat nut
to withdraw the thermostat.
10.
Fit the new thermostat and
re-assemble in reverse
order.
42 CONTROL THERMOSTAT REPLACEMENT
SER
VICING
1.
Lift off front panel and remove the grille assembly -refer
Frames 28 & 29. Undo the gas cock union.
Undo the 4 wing nuts and remove the burner / controls from
the boiler.
2.
Remove the ignition electrode . Refer to Frames 46 & 47.
3.
Unscrew the thermocouple nut and pull the thermocouple
clear.
4.
Undo the pilot supply pipe connection and ease clear of the
pilot burner. DO NOT LOSE the pilot injector, which is a
push-fit in the pilot burner housing.
5.
Remove the 2 securing screws and washers, and withdraw
the pilot burner.
6.
Fit the new pilot burner and re-assemble in reverse order,
ensuring that:
a.
The injector is in position when refitting the pilot supply.
b.
A gas-tight joint is made.
c.
The spark gap is correct. Refer to Frame 46 & 47.
Summary of Contents for Mexico Super CF 3/60P
Page 1: ......
