30
Mexico Super CF 3/60P - 3/140P -
Installation
49 THERMOCOUPLE REPLACEMENT - CF 3/100P, CF 3/125P & CF 3/140P ONLY
1.
Lift off front panel and remove the grille assembly -refer
Frames 28 & 29. Undo the gas cock union.
Undo the 4 wing nuts and remove the burner / controls
from the boiler.
2.
Remove the purse clip.
3.
Undo the thermocouple nut at the pilot burner and pull the
thermocouple clear.
4.
Undo the thermocouple connection at the gas valve and
withdraw the thermocouple.
5.
Fit the new thermocouple and re-assemble in reverse
order
Note.
Avoid sharp bends in the thermocouple lead and ensure that it
follows the same route as previously.
SERVICING
1.
Lift off front panel and remove the grille assembly -refer
Frames 28 & 29. Undo the gas cock union.
Undo the 4 wing nuts and remove the burner / controls from
the boiler.
2.
Remove the 2 screws securing the pilot burner and pull the
assembly clear of the main burner.
3.
Remove the 2 nuts and washers securing the burner to
the front plate and manifold. Withdraw the burner.
4.
Fit the new burner and re-assemble in reverse order,
taking care not to damage the main burner injector which
is screwed into the burner manifold.
50 MAIN BURNER REPLACEMENT - CF 3/60P & CF 3/75P ONLY
SER
VICING
Summary of Contents for Mexico Super CF 3/60P
Page 1: ......