31
Mexico Super CF 3/60P - 3/140P -
Installation
SERVICING
52 MAIN BURNER INJECTOR REPLACEMENT - CF 3/60P & CF 3/75P ONLY
51 MAIN BURNER REPLACEMENT - CF 3/100P, CF 3/125P & CF 3/140P ONLY
4.
Remove the 2 screws securing the pilot burner and pull
the assembly clear of the main burner.
5.
Remove the 2 nuts and washers securing the burner(s) to
the front plate and manifold. Withdraw the burner.
6.
Fit the new burner(s) and re-assemble in reverse order,
taking care not to damage the main burner injector which
is screwed into the burner manifold.
1.
Lift off front panel and remove the grille assembly -refer to
Frames 28 & 29.
2.
Undo the gas cock union.
Undo the 4 wing nuts and remove the burner / controls from
the boiler.
3.
Remove the 2 nuts and washers securing the bottom
burner baffle and remove the baffle.
SER
VICING
1.
Lift off front panel and remove
the grille assembly -refer Frames
28 & 29. Undo the gas cock
union.
Undo the 4 wing nuts and
remove the burner / controls
from the boiler.
2.
Remove the 2 screws securing
the pilot burner and pull the
assembly clear of the main
burner.
3.
Undo the 2 nuts and remove the
manifold/controls from the front
plate.
4.
Unscrew the burner injector from
the manifold.
5.
Fit the new injector, using an
approved jointing compound, and
re-assemble in reverse order.
Summary of Contents for Mexico Super CF 3/60P
Page 1: ......
