8
9
F
U
S
E
Using a flat bladed
screwdriver remove the
back cover from the
Touch thermostat and
insert only 3 batteries.
Immediately insert the
fourth battery into
the thermostat.
Turn electrical power
back on to the boiler and
heating system.
2M
Off
On
Auto
MON 10:20
ZONE 1
Hold the thermostat
approx 2 metres
away from the relay
transceiver.
1
2
3
4
Thermostat location guidelines
In-between the Ideal relay transceiver and the Touch thermostat there must be:
• Less than 20 metres
• No more than a total of 3 walls and ceilings
• No large metallic objects (e.g. American fridge/freezer)
• No large mirrors or windows
• No walls running along the RF path
The Touch thermostat must not be within 1 metre of a wifi booster / router and
should not be placed near draughts, in direct sunlight or near heat sources.
Thermostat installation
Off
On
Auto
MON 10:20
ZONE 1
20.5
Set system date
DONE
BACK
01 01 18
20.5
CONNECTING TO
BOILER
20.5
Set system time
DONE
00 00
Wait for the screen shown on the
left to be displayed. (In the unlikely
event that this screen is not shown
within 20 seconds, electrically
isolate the boiler and heating
system, remove one battery and
repeat from step 2.)
When successfully connected the
screen shown on the left will be
displayed. Set the 24hr clock, then
select “DONE”.
Set the date, then select “DONE”.
If the screen goes blank before
set up is complete, tap the screen
and select MENU to access Help &
Settings to set time and date.
When set up is complete the screen
will go blank.
5
6
7
8
Installation
To attach the thermostat to the wall bracket or desktop stand locate the thermostat
into the 3 lugs and slide downwards until it clicks.
Transceiver
