56
Installation and Servicing
SECTION 3 - SERVICING
3.17 SPARK GENERATOR REPLACEMENT
3.18 GAS CONTROL VALVE REPLACEMENT
1. Refer to Sections 3.2 & 3.3.
2. Disconnect the leads from the spark
generator.
3. Remove spark generator by pulling
forwards to release the retaining clip,
then push back to release the second
retaining clip.
4. Fit the new spark generator and re-
assemble in reverse order ensuring that
the the earth lead is replaced.
5. Check the operation of the boiler. Refer
to Sections 2.24 to 2.27.
1. Refer to Sections 3.2 & 3.3.
2. Remove the gas inlet pipe. Refer to
Section 3.4.
3. Unplug the electrical connection.
4. Disconnect the gas service cock, refer to
Section 2.25.
5. Remove the 2 securing screws in the
underside of the boiler casing and
remove the valve.
6. Remove brass injector from gas valve
outlet and re-fit into replacement valve.
7. Replace in reverse order ensuring all
seals are in good condition and the
assembly is gas sound.
8. Ensure all gas valve connections are
gas tight with a gas soundness check up
to the gas control valve.
9. Check the operation of the boiler. Refer to
Sections 2.24 to 2.27.
6
SER
VICING
Summary of Contents for VOGUE MAX COMBI 26
Page 4: ...4 Installation and Servicing...
Page 6: ...6 Installation and Servicing...
Page 74: ......
