47
Viscount GTS -
Installation & Servicing
INSTALLATION
VIS5168
The boiler will only operate efficiently if the exchange
surfaces are kept clean.
The boiler should be swept as an when required,
at least
along with the chimney, once a year
or more, depending
upon applicable regulations and specific needs.
VIS5166
1
2
3
4
3
VIS5167
IMPORTANT
The operations described below shall only be performed with the boiler and
power supply off.
75 FUEL-OIL OR GAS CONNECTIONS
Refer to the instructions supplied with the burner
- Turn off the power to the
boiler.
- Remove the upper front
panel (1).
- Remove the retaining
upper front crosspiece
(2) and then the lower
left and right-hand front
panels (3).
- Remove the lower front
panel (4).
76 CLEANING
77 CLEANING THE FLUEWAYS AND VERTICAL PLATES
- Remove the baffle plates from the upper flue ways.
- Carefully sweep the four flue ways with the brush supplied for
that purpose.
- Brush the baffle plates as well.
- If possible, use a vacuum cleaner.
VIS5171
- Remove the left and right-hand casing covers.
- Remove the top insulating material.
- Unfasten the wing nuts and remove
the four sweeping doors.
SER
VICING
