QUICK GUIDE
MODE SELECTION
You can choose to run your Halo Lite RF in
auto, manual or off mode.
Auto:
runs your heating to pre-set scheduled
times and temperatures.
Manual:
You control the temperature by
physically turning the dial.
Off:
Your heating will be set to a low
temperature (default 5ºC) for frost protection.
Move between Auto, Manual and Off modes
using the right hand side button, scroll down
the menu using the dial and push to select.
TOP TIP:
Your Halo Lite RF is designed to provide the
perfect balance of comfort and efficiency
. It has a feature
called Enhanced Load Compensation which balances the temperature in your radiators to maintain the
target room temperature with optimum efficiency. As a result you might notice that when the temperature
in your home reaches the target your radiators are not hot to touch. By controlling the temperature in your
radiators
your system is working in the most efficient way for you
.
Use the dial to
scroll between the
different modes
(Auto, Manual and
Off) and then push
the dial or press
the right hand
button to confirm
your selection.
The flame symbol
is present if the
heating is on
Text relating to right
hand button. Shows
whether the Halo
Lite RF is in auto,
manual or off mode
Right hand button
Turn dial to adjust temperature or navigate
menu. Push dial to select
The temperature scale
in the centre will be
orange and red when
the heating is on
Text relating to left
hand button. Use this
to enter the menu
Target temperature
Left hand button
Current temperature
is the current
temperature in your
home
