SL5001 Decibel U-Lock
The SL5001 Decibel U-Lock provides the ultimate theft deterrent by integrating
a 100 decibel siren that scares away potential thieves
.
Features:
•
100 decibel siren is triggered
if:
o
The steel shackle has been cut 50% or more
o
The motion sensor detects a brute-force attack
•
Secure, tamper-proof battery compartment.
•
Weather-resistant for indoor and outdoor use.
•
Comes with 2 keys. Register yours at
www.decibellocks.com
to order
replacements.
Included with this Product:
1.
Decibel U-Lock
2.
2x keys
Requires 2 AAA batteries (not included).
Parts of the Lock:
1.
Lock body
2.
Shackle
3.
Speaker
4.
Key cylinder
5.
LED light
6.
Motion sensor button
Installing the Batteries
Note: The external battery cover can only be removed when the
lock is unlocked to prevent tampering.
1.
Insert the key and unlock the U-lock. Pull the
shackle out of the lock body (Fig. 2). The key
cannot be removed while it is unlocked.
2.
Using a small Phillips screwdriver,
remove the two screws on the external
battery cover (Fig. 3). Remove the
external battery cover.
3.
Remove the four screws on the internal
battery cover (Fig. 4). Remove the
internal battery cover.
4.
Insert 2 AAA alkaline batteries (not
included) (Fig. 5). Ensure the polarity is
correct.
5.
Replace the internal battery cover and
tighten the four screws.
6.
Replace the external battery cover and
tighten the two screws.
7.
Test the U-Lock. Lock the shackle. Press the
motion sensor button. The lock will
beep
,
and after 10 seconds the motion sensor will
activate. Forcefully shake or hit the lock with
the palm of your hand, and the alarm
should sound. Unlock the shackle using the
keys to deactivate the alarm.
Note: Batteries will last 6-12 months on average.
Using the U-Lock
1.
Insert the key into the lock and unlock the U-lock.
2.
Guide the shackle around or through the items you wish to secure, and
through a fixed object such as a post or railing for maximum security.
(The key cannot be removed while the padlock is unlocked.)
3.
With the key in the lock, insert both ends of the shackle into the lock holes
until you hear a
beep
. The key should automatically turn to the locked
position. If not, turn the key to the locked position. The LED light will flash
a few times to indicate that it is now locked and armed. The LED will then
flash every 10 seconds.
4.
To activate the motion sensor, press the motion sensor button. You will
hear another
beep
. After 5 seconds, the motion sensor will
activate, so we recommend setting up the Decibel U-Lock
within this time. If the lock then detects any intense movement or
impact, the alarm will sound for approx. 30 seconds. It will then reset. To
silence the alarm, unlock the lock.
5.
To unlock the U-Lock, insert the key and turn it a ¼ turn to the right.
Remove the shackle from the lock holes.
W arning: All Decibel products contain a very loud siren as a theft
deterrent. If used at close range for prolonged periods of time, this
may cause ear damage or hearing loss. Do not hold close to ears,
and keep a way from small children.
Disclaimer: The Decibel U-Lock has been designed as a deterrent to theft. The
manufacturer/supplier will not accept any liability for personal injury,
property damage, or loss.
Register Your Keys!
Replacement keys can be ordered via our website,
www.decibellocks.com
.
To order replacements, register the serial number of the keys (
not
the lock)
online. If you lose your keys and don’t know the serial number, we cannot
send replacements! We strongly recommend that you note the serial number
attached to your keys and register it on our website. This way, if you lose
your keys or forget your serial number, we can find it for you.
We also recommend separating the keys immediately and storing one in a
secure location.
Disclaimer: Please note that replacements keys will be shipped by standard
mail, and cannot be rush ordered. Not all keys will be available immediately,
and some may be discontinued. Ideal Security does not accept liability for any
lost or stolen keys that have not been registered through our service.
For additional support, please visit
help.idealinc.com
, or contact us at
info@idealinc.com
or at 1-800-361-2236.
Fig. 4
Fig. 1
Fig. 2
Fig. 3
Fig. 5
