- 5 -
GB
Press
ON to switch on the device
The display reads VERSION x.x.x. Press to confirm.
Press the arrow buttons to select the menu. Press to confirm
selection.
To programme, point the programming device with the infrared emitting diode
at the sensor (see direction of arrow on the housing).
The following functions can be programmed:
MENU 1 CLEANING
For cleaning purposes, press the button to
confirm;
the
sensor
is switched off for 60 seconds.
MENU 2 DISINFECTION
Confirm the menu by pressing
. Set the desired
time (1-120 min) with the arrow buttons
and
confirm by pressing .
MENU 3 DIAGNOSIS
Press the button to confirm; the current sensor
program
is
displayed.
Operating elements
Operating instructions
Enter
- to confirm (OK)
Cancel
- to cancel or to go back one step in the menu
Arrow pointing up
-
to navigate
Arrow pointing down
- to navigate and switch on the device
ON
Menu
