Ideal Vacuum Habanero P1012726 User Manual Download

Page: 2 / 19

info@idealvac.com | www.idealvac.com

HRCF-08122022 - V 1.1

Ideal Vacuum warrants to the original purchaser, this product to be free from defects in workmanship

and materials for a period of 90 days from the original delivery date. The liability of Ideal Vacuum,

under this warranty, is limited to servicing, adjusting, repairing or replacing any unit or component

part which, at Ideal Vacuum’s sole discretion, is determined to have failed during normal, intended

use. This warranty does not cover improper installation, process related damage, product use

in any way other than defined in this manual, or any misuse, abuse, negligence, accident, or

customer modification to the product.

Prior to returning any product, we require that you contact us by phone or email to determine if

the issue can be resolved quickly. A technical support representative will work with you to resolve

the problem. If the issue cannot be resolved in that manner, we will issue an RMA number and

provide product return instructions.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,

INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED

WARRANTY OF FITNESS FOR USE OR FITNESS FOR A PARTICULAR PURPOSE. IDEAL

VACUUM SHALL NOT BE LIABLE UNDER ANY CIRCUMSTANCES FOR INDIRECT,

SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING OUT OF THE USE OF

THE PRODUCT. THE TOTAL LIABILITY OF IDEAL VACUUM SHALL NOT EXCEED THE

PURCHASE PRICE OF THE PRODUCT UNDER ANY CIRCUMSTANCES.

CUSTOMER SERVICE AND SUPPORT

If you have any questions concerning the installation or operation of this equipment, or if you

need warranty or repair service, please contact us. Customer Service and Technical Support is

available weekdays, from 8am-5pm, Mountain Time.

Phone: (505) 872-0037

Fax: (505) 872-9001

Email:

info@idealvac.com

techsupport@idealvac.com

Web:

idealvac.com

INTELLECTUAL PROPERTY

At Ideal Vacuum we constantly strive to innovate and improve on existing products. Therefore,

specifications and information are subject to change without notice. The Ideal Vacuum Logo

is a registered trademark, Habanero, AutoExplor, and the slogan “Our Products Develop

Tomorrow’s Technologies” are trademarks of Ideal Vacuum Products, LLC. Macor is a

registered trademark of Corning SAS. Windows is a registered trademark of Microsoft

Corporation. Variac is a registered trademark of Instrument Service Equipment, Inc. Reference

to products, trademarks, and registered trademarks owned by other manufacturers is made strictly

for informative purposes and are the sole properties of their respective owners.

WARRANTY

Summary of Contents for Habanero P1012726




















Search results

Summary of Contents for Habanero P1012726

Reviews:

Related manuals for Habanero P1012726

Brands by name

Popular brands

Ideal Vacuum Habanero P1012726, User Manual

Search results

Summary of Contents for Habanero P1012726

Reviews:

Related manuals for Habanero P1012726

Brands by name

Popular brands