5
TLX-7000
Aug 2021
TECHNICAL INFORMATION
Product Description
The iDEAL 7000TLX (TLX-7000) is a low-profile, lightweight, portable 7,000 lb. capacity low-rise
scissor frame contact tilt lift. Equipped with twin dual-action precision gear drive mechanisms & dual
independent safety lock bar devices, the lifting operation is simply powered by the torque supplied
from an electric handheld drill. The exclusive twin dual-action gear drives & independent safety lock
bars also allow for full operation from either side of the lift. The unique and easy-to-use vehicle
‘lift &
tilt
’ operation provides greater overall accessibility to vehicle, while also being able to quickly &
conveniently be stowed out of the way. The iDEAL 7000TLX consists of a tilt lift assembly, jack stand,
platform risers, drill drive adapters, safety lock pins, wall mount storage brackets & manual handle
with socket adapter. Optional Floor Rail Kit also available.
Specifications
Specifications
TLX-7000
Lift Capacity:
7,000 lbs.
Overall Length
51-3/4
”
Overall Width
64-3/8
”
Min. Height
4-1/2
”
Max Lift Height
22-1/2
” or 23-1/2” w/ Risers
Lift Speed
*30 to 40 sec.
Lift Weight
111 lbs.
Platform Length & Width
31-1/2
” x 7-1/4”
Min / Max Width - Outside Platforms
59-1/4
” - 63-3/4”
Min / Max Width - Inside Platforms
44-1/2
” - 49-1/4”
Power
(Supplied By Customer / Operator)
10Amp - 120VAC 1/2
” Corded Drill**
Ship Weight
214 lbs.
*
Depending on Power Drill Amperage & Vehicle Weight.
** Cordless Drills Not Recommended & Impact or Pneumatic Drills Should Not Be Used!
BEFORE USING
Site Selection
·
LIFT LOCATION
: Check layout dimension against floor plan requirements making sure that adequate
workspace is available. The floor surface on which the lift is to be used should be smooth and flat as
possible.
·
OVERHEAD OBSTRUCTIONS
: The area where the lift will be located should be free of overhead
obstructions such as heaters, building supports, electrical lines etc.
Surface Condition
·
Do not use the Lift on any type of asphalt or soft surface. Ensure lift is placed on a dry, oil & grease
free, level concrete surface capable of supporting the weight of the Lift with a vehicle. Do not use Lift
on concrete expansion seams or cracked, defective concrete. Failure to accomplish the foundation
surface requirements may cause lift instability, which could result in personal injury.
Operating Conditions
·
Operate lift only between temperatures of 41° - 104° F