6
TLX-7000
Aug 2021
INSTALLATION INSTRUCTIONS
These instructions must be followed to ensure proper installation and operation of your lift.
Failure to comply with these instructions can result in serious bodily harm and void product
warranty. Manufacturer will assume no liability for loss or damage of any kind, expressed or
implied resulting from improper installation or use of this product.
Required Tools
·
Scissors
·
Hammer or Small Crowbar
·
30mm Open-End Wrench
·
30mm Socket Wrench
·
10 Amp* 120VAC 1/2
” Corded Drill - DO NOT Use Impact Drill !!
(*
Less than 10 Amps may cause difficulty raising larger & heavier vehicles
)
Shipping Crate weight is approximately 215 lbs. Careful attention should be taken for offloading
& maneuvering Crate. The 66.3”L x 34.8”W x 10.4”H Crate is designed for easy mobility with
forklift or pallet jack.
Shipping Crate
1. Inspect shipping crate for any damages.
2. Open shipping crate by first cutting banding,
followed by carefully prying lid open.
3. Carefully remove all contents from crate, using
Package Contents list & diagram below to ensure
all items are included.
Package Contents
H.
A.
Tilt Lift Frame Assembly (1)
B.
Platform (2)
C.
Platform Hardware:
·
Pivot Bar (2)
·
Spacer (4)
·
Flat Washer (4)
·
Nylon Nut (4)
D.
Platform Riser Bar (2)
E.
Drill Drive Adapter (4)
F.
Safety Lock Pin (2)
G.
Handle & Socket Adapter (1)
H.
Wall Storage Bracket (2)
I.
Jack Stand
For Convenience
The iDEAL 7000TLX Tilt Lift comes
almost fully assembled.
Only the Platform Assemblies need
to be mounted to the Tilt Lift Frame.
(See Assembly Info Next)
A.
B.
C.
D.
E.
G.
F.
I.
