Table C: Auxiliary Contacts Listed for Use with SBS
®
75X Series
NOTES:
1.
Instructions are included with each crimp tool for proper operation.
2.
Use of non-Anderson Power crimp tools can affect UL & CSA approval.
3.
Use appropriate reducing bushings for smaller cable sizes.
4.
For appropriate crimping die set, see APP
®
catalog or website, or contact Technical Support at 978-422-3642.
5.
TP0001 and TM0001 tools require locator TL0001 for pins and locator TL0002 for sockets.
6. Contact
APP
®
Technical Support for the most current information and assistance with product selection.
7.
PLEASE CONSULT WITH AN AUTHORIZED ANDERSON REPRESENTATIVE FOR RECOMMENDED TERMINATION TOOLING.
1.
Wire Preparation -
Strip cable to dimensions shown in Table D.
Table D: Cable Stripping Dimensions
"X"
Connector Series
Contact Type
Inches
mm
NOTE
SBS
®
75G Power/Ground
0.56
14.0
-
SBS
®
50 Power 0.56
14.0
-
SBS
®
75X
Power 0.56
14.0
-
Aux Pin
0.18
4.6
For use when wire insulation OD is
SMALLER
than crimp barrel ID
Aux Socket
0.21
5.3
Aux Pin
0.24
6.1
For use when wire insulation OD is
LARGER
than crimp barrel ID
Aux Socket
0.28
7.1
NOTES: For SBS
®
75X - if using bundled cable, strip outer jacket to 2.05 inches (52mm). Cut power conductor 0.733 inches (18.62mm) shorter than
socket signal conductors. Cut pin signal conductors 0.51 inches (12.95mm) shorter than socket signal conductors.
Contact Part
Number
Wire Size
Crimp Tool
Insertion
Tool
Extraction
Tool
Inspection
Tool
PM16P12C30
#12 AWG Post-Mate Pin, 6.6mm
PM1000G1
(hand tool &
locator)
TL0001
Pin + TL0002
Sockets (Mil
Standard hand
tool & locator)
TL0001
(pneumatic tool &
locator)
11038G3 PM1003G1
PM1003GX
PM16P12A30
#12 AWG Pre-Mate Pin, 9.3mm
PM16P12B30
#12 AWG Pre-Mate Pin, 8.5mm
PM16P12S30
#12 AWG Standard Length Pin, 7.7mm
PM16S12S32
#12 AWG Socket
PM16P1416C30
#16 - 14 AWG Post-Mate Pin, 6.6mm
PM16P1416B30
#16 - 14 AWG Pre-Mate Pin, 8.5mm
PM16P1416A30
#16 - 14 AWG Pre-Mate Pin, 9.3mm
PM16P1416S30
#16 - 14 AWG Standard Length Pin, 7.7mm
PM16S1416S32
#16 - 14 AWG Socket
PM16P1620C30
#20 - 16 AWG Post-Mate Pin, 6.6mm
PM1002G1 PM1003G1 PM1003GX
PM16P1620B30
#20 - 16 AWG Pre-Mate Pin, 8.5mm
PM16P1620A30
#20 - 16 AWG Pre-Mate Pin, 9.3mm
PM16P1620S30
#20 - 16 AWG Standard Length Pin, 7.7mm
PM16S1620S32
#20 - 16 AWG Socket
PM16P2024C30
#24 - 20 AWG Post-Mate Pin, 6.6mm
PM16P2024B30
#24 - 20 AWG Pre-Mate Pin, 8.5mm
PM16P2024A30
#24 - 20 AWG Pre-Mate Pin, 9.3mm
PM16P2024S30
#24 - 20 AWG Standard Length Pin, 7.7mm
PM16S2024S32
#24 - 20 AWG Socket