3
FP14KC-X
JAN 2023
1.
Safety & Cautions
Important Statements:
Please do note the max weight capacity noted on the silver ID tag attached to the main post. Do not
try to lift any load that exceeds the rated lifting capacity. Please read this manual carefully before
installation and use of the lift, to avoid any property loss or personal injury caused by faulty operation.
No one is allowed to modify the controls, parts, or other mechanical parts of the machine without the
manufacturer
’s permission.
Qualification of Operators and Users:
·
Only personnel who have received professional training are allowed to operate and use the lift.
·
Electrical connection must be performed by qualified electricians.
·
Non-professionals shall not approach the lifting area.
Cautions:
·
Do not install the lift on asphalt or tar ground. Concrete thickness must meet requirement.
·
Please read and understand Safety Cautions carefully before operation of the lift.
·
The lift shall not be used outdoors if not being customized to meet special water proofing
requirements.
·
Hands and feet shall be kept away from moving parts of the lift at all times.
·
Only personnel who have received professional training are allowed to operate and use the lift.
·
Operators should not wear loose clothes to avoid being clamped by any moving part when the
machine is descending or rising.
·
Area around the lift must be kept clean to help avoid accidents and possible lift malfunctions.
·
The lift is designed to lift the entire vehicle, not part of it. Do not try to lift any vehicle beyond the
lift
’s rated lifting capacity.
·
Make sure the lift is secured on the safety locks before working under the lifted vehicle.
·
If using rolling bridge jack(s), lifting blocks must be positioned at the vehicle
’s pickup points,
noted by the OEM. Always lift the vehicle slowly, checking the vehicle is stable without any risk
of tipping or falling, before lifting it to the desired height.
·
Check for any missing, broken or seized parts or components that may contribute to improper
wear & tear to lift. Once any anomaly is detected, stop use immediately and contact your dealer.
·
Always fully lower lift to the lowest position before driving a vehicle On or Off the lift.
·
It is not allowed to modify any part of the lift without the manufacturer
’s permission.
·
If the machine is to stand idle for a long period of time, the operator / user shall:
a. Turn off electrical power & disconnect pneumatic air supply.
b. Drain hydraulic oil from power unit. (Per local codes, depose of used oil responsibly.)
c. Lubricate moving parts with grease.
Training:
·
Lift operators must be qualified & trained for safe use & operation of lift as described in Manual
.
