LT 8000 Series: Quick Reference Card - 1
6510-30- 0326 Rev. A
I. Display and Remote Handsets
13
15
16
14
17
18
19
20
21
22
23
25
24
1
14 15
2
3
4
5
6
7
9
10
11
8
12
16
13
1. Graphical Display
14. Talkset Jack
2. Option Keys
15. DB-9 Serial Port
3. Autotest Key
16. DC Input Jack
4. Arrow Keys
17. Pass LED
5. Wiremap Key
18. Fail LED
6. Length Key
19. Testing LED
7. Enter Key
20. Talk LED
8. Alphanumeric Keys
21. Tone LED
9. Escape Key
22. High Voltage LED
10. Cable Selection Key
23. No Patch Cable LED
11. Backlight Key
24. Battery Level LED’s
12. On/Off Switch
25. Tone switch
13. Connector Port
II. Soft Keys
Okay or confirm an action.
Stop or cancel an action.
Print data.
Save data using Auto Increment naming convention.
Overwrite or rename data.
Run the selected test in continuous mode (real time).
Page-up for information.
Soft Keys (Continued)
Page-down for information.
Select/Deselect an item in a list box.
Select an action item.
Activate/Deactivate the Talk Set option.
Delete characters.
III. Ready Screen
1
2
3
4
5
6
7
8
9
10 11 12
13 14
15
16
Screen Indicators
1. Memory Usage
5. Time and Date
2. Battery Meter or AC Cable
6. Setting
3. Talk Set Indicator
7. Label
4. Screen Title
8. Label
Screen Functions
9. Cable ID
13. Instrument Information
10. Test Record
14. Analyze
11. Field Calibration
15. Talk Set Select
12. Preferences
16. Help
IV. Tester Calibration
A calibration screen will always appear 24 hours after the last
field calibration.
1. To recalibrate the tester, connect the DH and RH end-to-
end using the Field Calibration Adapter.
2. From the DH
Tools
screen, select the
Field Calibration
icon.
Tester Calibration (Continued)
1. Press the
Tone Key
on the RH.
2. Select the
Run
option on the DH.
If the calibration was successful, remove the Field Calibration
Adapter.
If the calibration was unsuccessful, refer to the
User’s Guide
,
Chapter 3, Tester Field Calibration
.
V. Tester Configuration
Most tester configuration parameters are set from the
Preferences screen
1. From the Tools screen, select the
Instrument
Icon.
The Preferences screen displays.
2. Use the
Arrow
keys to select one of the following
configuration options:
- User Information
- Autotest Preferences
- Display Contrast
- Time-out Options
- Measurement Units
- PC & Printer I/F
- Talkset Option
- Date & Time
- Display Language
- Factory Defaults
- Clear Memory
3. Enter new configuration parameter(s) as required.
VI. Cable Type Selection
1. Press the
Cable Selection
hard key.
2. Press
Enter
to select a cable type and its associated
default NVP for testing.
3. Position the cursor and press
Enter
to change to a
new cable type and its associated default NVP for testing.
Note:
A number of unique cable manufacturer NVP values
are stored in the tester memory. To access the list of
manufacturer cables for the currently highlighted test
standard, press the
soft key.
4. If you want to use the selected cable as the basis for a
Custom Cable, press the
soft key
5. Change the default cable features and save the cable as a
new Custom Cable.
