Hardware Installation » Whiteboard Wall Mounting With Template
- 10 -
Mounting to Conventional Framing
Mounting to Masonry Wall
2)
Drill eight, 1/2” holes in the wall
where shown on template.
3)
Fasten the brackets to the wall using
the toggle bolts.
2)
Drill eight 3/8” holes in the wall where
shown on template.
3)
Attach the mounting brackets to the wall
using the included anchors and bolts. Tap the
anchors into the holes first, using your 9/16”
socket and ratchet to tighten the nuts until
the anchors set. Remove the nuts, place the
mounting brackets onto the bolts, then
tighten the nuts onto the bolts to secure the
brackets.
4)
Hang your whiteboard: the four corner studs must be inserted into the mounting brackets
simultaneously.
