IDEATEC S.A. - Z.I. de Noville-les-Bois - rue Léopold Génicot 19A - 5380 Fernelmont, Belgium - Tel: +32(0)81 42 00 10 - Fax: +32(0)81 57 91 70 - E-mail: info@ideatec.be
User’s guide DLC4000/DLC8000 -
Doc. V2.1 - Firmware V3.1
Page 20
Identification des éléments
Description des éléments
Description du produit
11.
&
Page 15
B5
B6
B3
B7
B8
B2
B4
B1
0
1
3
4
3X
4X
2
3X
2X
3X
1X
B5
B6
B3
B7
B8
B2
B4
B1
B5
B6
B3
B7
B8
B2
B4
B1
B5
B6
B3
B7
B8
B2
B4
B1
IN 2 -
IN 2 -
B5
B6
B3
B7
B8
B2
B4
B1
B5
B6
B3
B7
B8
B2
B4
B1
B5
B6
B3
B7
B8
B2
B4
B1
3X
5X
5
11.5. DLC4000/8000 Configuration - MODE 1 (continued)
Operation & Configuration (continued)
10.5.4. Key B4 and negative input 2 configuration.
By default the key B4 is a switch available and is linked to positive output 4 / negative ouput 2.
It’s possible to disable the key B4 and to put a black pictogram on the key to notify the user of the console that the key
is not available. When the key is not available then the positive output 4 / negative output 2 are permanent outputs,
going off only when console is off or the power supply of the DLC4000 or DLC8000 is disconnected.
Key B4 can be used as « markup » function.
Some functions are linked to the negative input 2.
Key B4 is a momentary push button and activates the positive output 4 / negative output
2 when it is pressed and the 2 ouputs are going OFF when key B4 is released.
Key B4 is a switch and activates the positive output 4 / negative output 2.
No condition.
Key B4 is not available and the positive output 4 / negative output 2 are permanent
positive outputs.
SELECTION FLASHES DESCRIPTION
Key B4 is a switch and activates the positive output 4 / negative output 2.
Key B4 is included inside the scene 2, only if key B6 is configured in scene 2 mode.
See key B6 configuration in scene 2 mode on page 22.
Key B4 is a switch working in « markup » mode and controls positive output 4 / negative
output 2. Key B4 is activated if key B1 is active (« blue lights ») and « handbrake »
signal is applied on negative input 2.
Key B4 can be controlled manually when key B1 is active and « handbrake » is ON.
Key B4 is an exclusive switch working in « markup » mode and controls positive output 4
/ negative output 2. Key B1 and key B4 are in « group » mode : if key B1 is active and
key B4 is pressed then key B1 is going OFF automatically. If key B4 is active and key B1
is pressed then key B4 is going OFF automatically.
No interlock function with negative input 2.
