Assembly with Pole:
1. Follow steps 1 and 2 from Assembly without Pole section.
2. Pass the bottom end micro USB cable (G) through the
display base (I).
3. Screw into place by turning clockwise. Note: make sure to
screw pole (D) in straight.
Do not over tighten.
4. Firmly connect the bottom end micro USB cable (G) into USB
port on the front side of the display base (I). On the underside
of display base (I) run cable in track and use adhesive tape (J)
to keep in place.
5. Align the top of the pole (D) with the monitor’s bracket (A). Use
screw and nut (C) to join together using a Phillips screwdriver
(not included). Plug the top end micro USB cable (B) to the
Monitor USB port (A).
6. Unlock any of the 2 clamps (E) on the pole (D) by pulling
outward. Adjust to desired height and relock the clamps.
Note:
To weigh yourself, follow steps 5 and 6 on Assembly
Without Pole section.
