IDEC GT3W Series Instructions Manual Download

Page: 6 / 11

GT3 Series Accessories

Timers

839

USA: 800-262-IDEC Canada: 888-317-IDEC

Switches & Pilot Lights

Display Lights

Relays & Sockets

Timers

Terminal Blocks

Circuit Breakers

Panel Mounting Accessories

Panel Mount Sockets and Hold-Down Springs

Panel Mount Socket

Applicable HD Springs

Style

Appearance

Use with Timers

Part No.

Appearance

Part No.

8-Pin Solder Terminal

GT3A- (8-pin)
GT3D- (8-pin)
GT3W- (8-pin)
GT3F- (8-pin)
GT3S

SR2P-51

SFA-402

11-Pin Solder Terminal

GT3A- (11-pin)
GT3D- (11-pin)
GT3W- (11-pin)
GT3F- (11-pin)

SR3P-51

For information on installing the hold-down springs, see page 838.

Flush Panel Mount Adapter and Sockets that use an Adapter

Accessory

Description

Appearance

Use with Timers

Part No.

Panel Mount Adapter

Adaptor for ﬂ ush panel mounting GT3 timers

All GT3 timers

RTB-G01

Sockets for use with
Panel Mount Adapter

8-pin screw terminal

(Shown: SR6P-M08G for Wiring Socket Adapter)

All 8-pin timers

SR6P-M08G

11-pin screw terminal

All 11-pin timers

SR6P-M11G

8-pin solder terminal

All 8-pin timers

SR6P-S08

11-pin solder terminal

All 11-pin timers

SR6P-S11

No hold down springs are available for ﬂ ush panel mounting.

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Ready to Order?

Steven Engineering

Technical Question?

Summary of Contents for GT3W Series












Search results

Summary of Contents for GT3W Series

Reviews:

Related manuals for GT3W Series

Brands by name

Popular brands

IDEC GT3W Series, Instructions Manual

Search results

Summary of Contents for GT3W Series

Reviews:

Related manuals for GT3W Series

Brands by name

Popular brands