B-1905-1(0)
INSTRUCTION SHEET - HS6B Series
Safety Switch
( 4 / 4 )
2016.08
8
Dimensions
*2 The actuator stop is used
when adjusting the actuator
position. Remove after the
actuator position is deter-
mined.
*3 The direction of adjustable
angle can be changed (verti-
cal or horizontal) by changing
the insertion direction of the
joint (white plastic part). See
the figures below. Do not lose
the joints. Actuators do not
operate normally without a joint.
Joint
(Horizontal Adjustment)
(Vertical Adjustment)
Factory defalut
(Supplied)
(Supplied)
(Supplied with actuator)
(Supplied with actuator)
(Supplied with actuator)
(Supplied wi h actuator)
13
28.2
7.5
2.5
15
34
25
16.8
5.5
2
20°
R2.1
20°
0.8
1.2
3.5
25
20°
20°
Type:HS6B-
□
Slot Plug (Supplied)
Note: Use the slot plug attached
to the safety switch to close
the unused actuator entry slot.
Safety Switch Mounting Hole Layout
(Can be installed either frontwards or
backwards)
2-M4 Screws
(Φ4.3 or M4 Tap)
Actuator
Stop *2
Actuator
Stop*2
Type:HS9Z-A61
Type:HS9Z-A62
Type:HS9Z-A65
Type:HS9Z-A66
Joint
Joint
Actuator Stop *2
(Horizontal Adjustment)
(Horizontal Adjustment)
(Vertical Adjustment)
Angle Adjusting Screw
(M3 Hexagon Socket Set Screw)
Actuator Stop *2
Actuator Stop *2
Actuator Mounting Hole Layout
(Horizontal / Vertical Adjustment)
2-M4 Screws
(Φ4.3 or M4 Tap)
Actuator Mounting Hole Layout
(Straight, L-shaped)
2-M4 Screws
(Φ4.3 or M4 Tap)
Angle Adjusting Screw
(M3 Hexagon Socket Set Screw)
Angle Adjusting Screw
(M3 Hexagon Socket Set Screw)
Note: HS9Z-A65 and HS9Z-A66 are different in he insertion direction of the metal
key(180°).
Factory defalut *3
(Vertical Adjustment)
Angle Adjusting Screw
(M4 Holes)
Base
Base
Actuator Stop *2
(M3 Hexagon Socket Set Screw)
Factory defalut *3
9
Precaution for Disposal
Dispose of HS6B Safety Switch as an industrial waste.
http://www.idec.com
Manufacturer: IDEC CORP.
2-6-64 Nishimiyahara Yodogawa-ku, Osaka 532-0004, Japan
EU Authorized Representative: IDEC Elektrotechnik GmbH
Heselstuecken 8, D-22453 Hamburg, Germany
DECLARATION OF CONFORMITY
We, IDEC CORPORATION 2-6-64, Nishimiyahara Yodogawa-ku,Osaka 532-0004, Japan declare
under our sole responsibility that the product:
Description: Safety Switch
Model No: HS6B
to which this declaration relates is in conformity with the EC Directive on the following standard(s)
or other normative document(s). In case of alteration of the product, not agreed upon by us, this
declaration will lose its validity.
Applicable EC Directive : Low Voltage Directive (2014/35/EU)
Machinery Directive (2006/42/EC)
Applicable Standard(s) : EN 60947-5-1,GS-ET-19
Accessories dimensions
Dimensions
15
10.1
10.4
5
5
1
30.8
R2.2
(9)
78
(30.1
±1
)
30
1
( )
14
50.8
35
0.8
(12.6
±1
)
0.8
(5)
20
(58)
(41.4)
22.6
±1
0.8
40.1
±1
(21.4)
(14)
(5)
0.8
20 to 22
35.9
28.2
(8.4)
14
3.5
1.2
2-Φ4.3
2-Φ9
14 15
14
28.2
1.2
14
13.1
(8.4)
3.5
34
14
2-Φ4.3
2-Φ9
(Supplied with actuator)
Actuator Stop *2
When installed on the door (5)
When installed on
the door (33 8)
When installed on
he door (5)
