manualshive.com logo in svg

IDEC MICROSmart FC6A Series, Ladder Programming Manual

The IDEC MICROSmart FC6A Series offers innovative automation solutions. Get hands-on with our versatile ladder programming manual, available for free download at 88.208.23.73:8080. Discover how to harness the power of this cutting-edge product and unleash its capabilities in your automation projects.

Share
Download
background image

2: D

EVICES

2-10

FC6A S

ERIES

 MICROS

MART

 L

ADDER

 P

ROGRAMMING

 M

ANUAL

 FC9Y-B1726

■

M8013: Calendar/Clock Data Write/Adjust Error Flag

When the clock writing or clock adjustment processing could not be executed normally, M8013 is turned on. It is turned off 
when the processing completes normally.

■

M8014: Calendar/Clock Data Read Error Flag

When an error occurs while calendar/clock data is read from the internal clock to the special data registers (D8008 to D8021), 
M8014 is turned on. It is turned off when reading completes normally.

■

M8016: Calendar Data Write Flag

When M8016 is turned on after writing data to the calendar data (write-only) special data registers (D8015 to D8018), the 
calendar data (year, month, day, day of the week) is written to the internal clock.

■

M8017: Clock Data Write Flag

When M8017 is turned on after writing data to the clock data (write-only) special data registers (D8019 to D8021), the clock 
data (hours, minutes, seconds) is written to the internal clock.

■

M8020: Calendar/Clock Data Write Flag

When M8020 is turned on after writing data to the calendar/clock data (write-only) special data registers (D8015 to D8021), the 
calendar data (year, month, day, day of the week) and the clock data (hours, minutes, seconds) is written to the internal clock.

■

M8021: Clock Data Adjust Flag

When M8021 is turned on, the clock is adjusted with respect to seconds.

•

When M8021 is turned on, if the seconds are between 0 and 29, the seconds will be set to 0 and the minutes remain the 
same.

•

When M8021 is turned on, if the seconds are between 30 and 59, the seconds will be set to 0 and 1 will be added to the 
minutes.

■

M8022: User Communication Receive Instruction Cancel Flag (Port 1)

While M8022 is on, user communication (receive instruction) executing on Port 1 is canceled.

■

M8023: User Communication Receive Instruction Cancel Flag (Port 2)

While M8023 is on, user communication (receive instruction) executing on Port 2 is canceled.

■

M8024: BMOV/WSFT Executing Flag

While the WSFT (word shift) instruction or the BMOV (block move) instruction is executing, M8024 is turned on. When 
completed, M8024 is turned off.

■

M8025: Maintain Outputs While Stopped

When the FC6A Series MICROSmart is stopped while running with M8025 turned on, the outputs maintain their runtime status. 
When set to run again, M8025 is automatically turned off.

■

M8026: User Communication Receive Instruction Cancel Flag (Port 3)

While M8026 is on, user communication (receive instruction) executing on Port 3 is canceled.

■

M8033, M8145 to M8147, M8170, M8176, M8365 to M8394: User Communication Receive Instruction Cancel 
Flag (Port 4 to 33)

While these flags are on, user communication (receive instruction) being executed on the corresponding port is canceled.
M8033 = User Communication Receive Instruction Cancel Flag (Port 4)
M8145 = User Communication Receive Instruction Cancel Flag (Port 5)
M8146 = User Communication Receive Instruction Cancel Flag (Port 6)
M8147 = User Communication Receive Instruction Cancel Flag (Port 7)
M8170 = User Communication Receive Instruction Cancel Flag (Port 8)
M8176 = User Communication Receive Instruction Cancel Flag (Port 9)
M8365 = User Communication Receive Instruction Cancel Flag (Port 10)
M8366 = User Communication Receive Instruction Cancel Flag (Port 11)
M8367 = User Communication Receive Instruction Cancel Flag (Port 12)
M8370 = User Communication Receive Instruction Cancel Flag (Port 13)
M8371 = User Communication Receive Instruction Cancel Flag (Port 14)
M8372 = User Communication Receive Instruction Cancel Flag (Port 15)
M8373 = User Communication Receive Instruction Cancel Flag (Port 16)
M8374 = User Communication Receive Instruction Cancel Flag (Port 17)
M8375 = User Communication Receive Instruction Cancel Flag (Port 18)
M8376 = User Communication Receive Instruction Cancel Flag (Port 19)
M8377 = User Communication Receive Instruction Cancel Flag (Port 20)

Summary of Contents for MICROSmart FC6A Series





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MICROSmart FC6A Series

Paradyne 3163 Quick Reference preview
3163
Brand: Paradyne Pages: 16
Aastra CNX Product Brief preview
CNX
Brand: Aastra Pages: 2
DBM ACE9600 Operating Manual preview
ACE9600
Brand: DBM Pages: 50
H3C H3C S7500E Series Instruction Manual preview
H3C S7500E Series
Brand: H3C Pages: 34
H3C SR8800 IM-FW-II Manual preview
SR8800 IM-FW-II
Brand: H3C Pages: 5
H3C H3C S7500E Series Installation Manual preview
H3C S7500E Series
Brand: H3C Pages: 50
Vonets MINI300 Quick Setting Manual preview
MINI300
Brand: Vonets Pages: 8
TFortis Teleport-1 Configuration Manual preview
Teleport-1
Brand: TFortis Pages: 86
ForeScout CounterACT Quick Installation Manual preview
CounterACT
Brand: ForeScout Pages: 28
Nvidia nForce 680I LT SLI Hardware User Manual preview
nForce 680I LT SLI
Brand: Nvidia Pages: 80
Hama FireWire Combo Instructions Manual preview
FireWire Combo
Brand: Hama Pages: 8
IOtech ADAC/5500MF Installation Manual preview
ADAC/5500MF
Brand: IOtech Pages: 16
Telex Communications 2472AA Instruction Manual preview
2472AA
Brand: Telex Communications Pages: 28
Buffalo LinkStation Mini User Manual preview
LinkStation Mini
Brand: Buffalo Pages: 71
FDI ELI70-CR Quick Start Manual preview
ELI70-CR
Brand: FDI Pages: 2
AXIOMTEK CEM820 Series User Manual preview
CEM820 Series
Brand: AXIOMTEK Pages: 58
Rolls HR11C - SCHEMA Wiring Diagram preview
HR11C - SCHEMA
Brand: Rolls Pages: 1
Concept Pro DEEP LEARNING PLUS Quick Start Manual preview
DEEP LEARNING PLUS
Brand: Concept Pro Pages: 28

Brands by name

Popular brands

Load more brands