manualshive.com logo in svg

IDEC MICROSmart FC6A Series, Ladder Programming Manual

The IDEC MICROSmart FC6A Series offers innovative automation solutions. Get hands-on with our versatile ladder programming manual, available for free download at 88.208.23.73:8080. Discover how to harness the power of this cutting-edge product and unleash its capabilities in your automation projects.

Share
Download
background image

25: D

ATA

 L

OG

 I

NSTRUCTIONS

25-16

FC6A S

ERIES

 MICROS

MART

 L

ADDER

 P

ROGRAMMING

 M

ANUAL

 FC9Y-B1726

Notes:

• The TRACE instruction accumulates data while FC6A Series MICROSmart is running but does not accumulate data when FC6A Series 

MICROSmart is stopped.

• Data is accumulated while FC6A Series MICROSmart is running even when the input to the TRACE instruction is off.
• When the input to the TRACE instruction is turned on, the accumulated data is output to the CSV file.
• Trace data is accumulated even when the MCS (master control set) instruction is on.
• For the configuration of the maximum log file size, see Chapter 5 "Functions and Settings" in the "FC6A Series MICROSmart User's Manual".
• The maximum number of TRACE instructions that can be programmed in a user program is three. Make sure that the folder name specified 

by the TRACE instruction is not duplicated by any of the folder names specified by the other TRACE instructions. When the folders are 
duplicated, trace data with a mixed format is output to the same CSV file.

• The number of scans of which the trace data can be saved to the CSV file when the TRACE instruction is executed one time depends on the 

number of devices specified to trace and the display type for each device. For details, see "9. Trace data size" on page 25-18.

• The TRACE instruction cannot be used in an interrupt program. If used, a user program execution error will result, turning on special internal 

relay M8004 and the ERR LED on the FC6A Series MICROSmart. For details about the user program execution errors, see "User Program 
Execution Errors" on page 3-10.

• Trace data is not accumulated when the TRACE instruction is skipped by the JMP (jump) instruction. For the JMP (jump) instruction, see "JMP 

(Jump) and JEND (Jump End)" on page 4-31.

• While the input to the TRACE instruction is on, the trace data is repeatedly output to the CSV file. When you want to output the trace data only one 

time, add a SOTU (single output up instruction) or SOTD (single output down instruction) to the input conditions. For SOTU (single output up 
instruction) or SOTD (single output down instruction), see "Basic Instructions" - "SOTU and SOTD (Single Output Up and Down)" on page 4-28.

• The data writing process to the SD memory card for the TRACE instruction takes several scans. Once a TRACE instruction is executed, the 

process continues until the trace data transfer is complete, regardless of any change in the instruction input. While the trace data is being 
written to the SD memory card, the instruction is not executed even when the input to the TRACE instructions are turned on. To execute the 
TRACE instruction again, confirm that the previous data writing process has finished, and then execute the instruction.

Valid Devices

Note: 

Specify the folder name by entering characters.

 Special internal relays cannot be designated as D1. Special data registers cannot be designated as D2.

Settings

1. S1 (source 1): Folder Name

Specify the folder name on the SD memory card that will store the trace data using up to 8 single-byte alphanumeric characters.

Notes:

• The following single-byte characters cannot be used in folder names:

 / 

\ 

: * ? " < > | # { } % & ~

• Consecutive periods cannot be used in folder names.
• A period cannot be used at the start or the end of the folder name.
• Single-byte spaces at the start or the end of the folder name are omitted.

Device

Function

I

Q

M

R

T

C

D

P

Constant

Repeat

S1  (Source  1)

Folder  name  (Note)

—

—

—

—

—

—

—

—

—

—

D1 (Destination 1)

Completion output

—

X

—

—

—

—

—

—

—

D2  (Destination  2)

Execution  status

—

—

—

—

—

—

—

—

—

2.

3.

1.

5.

6.

7.

8.

9.

10.
11.

4.

Summary of Contents for MICROSmart FC6A Series





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MICROSmart FC6A Series

LORD AP5103 Series Technical Manual preview
AP5103 Series
Brand: LORD Pages: 9
Opvimus UMX-ETH+ Operating Instructions Manual preview
UMX-ETH+
Brand: Opvimus Pages: 12
Blackrock Microsystems Cerebus Instructions For Use Manual preview
Cerebus
Brand: Blackrock Microsystems Pages: 27
Roland MSL-15 Owner'S Manual preview
MSL-15
Brand: Roland Pages: 12
Cabletron Systems MMAC-Plus 9G536-04 User Manual preview
MMAC-Plus 9G536-04
Brand: Cabletron Systems Pages: 42
Doremi MB-4K User Manual preview
MB-4K
Brand: Doremi Pages: 15
Intel i960 Jx Developer'S Manual preview
i960 Jx
Brand: Intel Pages: 578
CompuLab CL-SOM-AM57 Series Reference Manual preview
CL-SOM-AM57 Series
Brand: CompuLab Pages: 79
Renesas M34502T-MCU User Manual preview
M34502T-MCU
Brand: Renesas Pages: 40
EZCast Pro Dongle II D10 Repair Manual preview
Dongle II D10
Brand: EZCast Pro Pages: 4
ekwb EK-FC R9-295X2 Installation And Mounting Manual preview
EK-FC R9-295X2
Brand: ekwb Pages: 2
Cypress Semiconductor CY8C24223A Specification Sheet preview
CY8C24223A
Brand: Cypress Semiconductor Pages: 31
Cypress Semiconductor CY7C68023 Specification Sheet preview
CY7C68023
Brand: Cypress Semiconductor Pages: 9
OWC ACCELSIOR 8M2 Assembly Manual & User Manual preview
ACCELSIOR 8M2
Brand: OWC Pages: 9
Fortec Star Diamond Systems DS-MPE-CAN2L Manual preview
Diamond Systems DS-MPE-CAN2L
Brand: Fortec Star Pages: 36
ICP DAS USA ZT-2005-C8 User Manual preview
ZT-2005-C8
Brand: ICP DAS USA Pages: 60
Fujitsu FUTRO S700 Datasheet preview
FUTRO S700
Brand: Fujitsu Pages: 7
Fujitsu LQFP-100P Operation Manual preview
LQFP-100P
Brand: Fujitsu Pages: 16

Brands by name

Popular brands

Load more brands