SE2L User’s Manual (SE9Z-B1865)
130
8.6.1 Method of replacing the optical window
Necessary tools
・
Hexagonal wrench
・
Torque wrench
Stop using the system and disconnect the SE2L. Remove the SE2L from its mounting location.
Take the SE2L to dust free environment. Remove the dust on SE2L if it is present.
During the
replacement of optical window, take sufficient measure to prevent the dust from entering inside the
device as this could affect the detection capability of SE2L.
Use wrench to remove screws 1 to 4 fixing the optical window.
Figure 8-1 Remove the optical window
To remove the optical window, lift it slowly. Refrain from touching the optical components of SE2L.
Avoid applying the force while removing as it could damage the optical component affecting the
detection capability of SE2L.
If there is contamination around the case, remove it with a clean cloth without touching the optical part.
If there is contamination on the optical mirror remove it with an air blower.
Set a torque wrench to
0.63N
･
m.
Do not touch the new optical window with bare hands. It is recommended to wear clean thin gloves to
unpack the new optical window.
1
2
3
4
Optical window
Optical portion
Housing
Summary of Contents for SE2L-H05LPC
