IDEC WindO/I-NV4 User Manual Download

Page: 1012 / 1738

3 Alarm Log Settings Dialog Box

13-22

WindO/I-NV4 User’s Manual

Add Device Address data to File Name: Select this check box to add the bottom three digits of

the value of the device address configured by (File

Name Device Address) to the end of the file name for

the output data.

(File Name Device Address): Specifies the word device that is the source for the value to

add to the file name. For the device address configuration

procedure, refer to Chapter 2 “5.1 Device Address Settings” on

page 2-70. This option can only be configured when the

Add

Device Address data to File Name

check box is selected.

Example: When

File Name

is "ALMHTO01" and the value of device address in (File Name

Device Address) is 123, the file name is "ALMHTO01123.CSV".

Add Time Stamp: Select from the following format for date and time to be added to the file

name when data is output:

None

YY+MM

YY+MM+DD

YY+MM+DD+HH

YY+MM+DD+HH+MM

YY+MM+DD+HH+MM+SS

The format is YYMMDD_hhmmss (YY: year, MM: month, DD: day, hh: hour,

mm: minute, ss: second).

Example:

File Name

is "ALMHTO01" on September 15 2013 at 23:30:50

ALMHTO01_13

YY+MM

ALMHTO01_1309

YY+MM+DD

ALMHTO01_130915

YY+MM+DD+HH

ALMHTO01_130915_23

YY+MM+DD+HH+MM

ALMHTO01_130915_2330

YY+MM+DD+HH+MM+SS

ALMHTO01_130915_233050

Set limit on files:

Specifies the upper limit (1 to 100) when limiting the number of files to be output.

Output Alarm Level: Select this check box to output the level settings.

When the

Set limit on files

check box is selected, note the following points.

• If the number of data files saved on the external memory device increases, it may take some time for

the data output processing, or the output of the next data may not be processed normally.

• When displaying pictures saved on the external memory device and processing the output of data both

occur simultaneously, the pictures may not be displayed.

• When parts that blink overlap pictures saved to the external memory device, the blinking period may

slow down when data output processing occurs.

• The following single-byte characters cannot be used in the file name configured by

File Name

Specify File Name by Value of Device Address

" * / : ; < > ? \ |

• File names that exceed the limits in

Specify File Name by Value of Device Address

and file names

configured with characters that cannot be used are as follows.

- When the text of the file name exceeds the maximum number of device addresses (no NULL), the text

stored in device addresses up to the maximum number of device addresses from the start is
configured.

- When a character that cannot be used is set, the text is up to that character.
- When the first character is a character that cannot beused, the text is that set for

File Name

• The operation when the

Set limit on files

check box is selected is as follows.

- The files are output up to the set limit, and then for additional files, the new files are saved by

discarding the old files in order of the oldest first.

- If the number of files saved on the external memory device already exceeds the limit when operation

starts, the number of files at that time is the limit. From there the data is discarded in order from the
oldest data and replaced with new data with each file output.

IDEC WindO/I-NV4, User Manual

Search results

Summary of Contents for WindO/I-NV4

Reviews:

Related manuals for WindO/I-NV4

Brands by name

Popular brands