3 Alarm Log Settings Dialog Box
13-24
WindO/I-NV4 User’s Manual
File Name:
Enter the file name for the output data or shows the file name.
The default is “ALMHTA.CSV”. To change the file name, enter a new file name. The maximum
number is 120 characters (including the extension).
Specify File Name by Value of Device Address:
Select this check box to specify the name of the file for the output data with the value of the
device address configured by (File Name Device Address).
(File Name Device Address): Specifies the word device that is the source of the data to use
as the file name. The file name is set by reading the values
sequentially from the starting device address specified with
the File Name Device Address and handling those values as
character data up to the character before NULL (00).
The maximum number of device addresses is 40 (80 single-
byte characters). You can only specify an internal device. For
the device address configuration procedure, refer to Chapter 2
“5.1 Device Address Settings” on page 2-70.
Example: When the device address specified by (File Name Device Address) is LDR100 and
the text to set is "IDEC":
The file name at this time becomes "IDEC.CSV".
Add Device Address data to File Name:
Select this check box to add the bottom three digits of the value of the device address
configured by (File Name Device Address) to the end of the file name for the output data.
(File Name Device Address): Specifies the word device that is the source for the value to
add to the file name. For the device address configuration
procedure, refer to Chapter 2 “5.1 Device Address Settings”
on page 2-70. This option can only be configured when the
Add Device Address data to File Name
check box is
selected.
Example:
File Name
is "ALMHTA" and the value of the device address configured by (File
Name Device Address) is 123, the file name is "ALMHTA123.CSV".
Add Time Stamp:
Selects the format of the output date and time to add to the file
name for the output data.
None
,
YY
,
YY+MM
,
YY+MM+DD
The format is YYMMDD (YY: year, MM: month, DD: day).
Example:
File Name
is "ALMHTA" on September 15 2013
YY
:
ALMHTA_13
YY+MM
:
ALMHTA_1309
YY+MM+DD
:
ALMHTA_130915
Realtime Output:
Select this check box to forcibly output the data and save it to file at
the desired timing.
(Trigger Device Address):
Specifies the bit device or the bit number of the word device
to serve as the condition to forcibly output the data. You can
only specify an internal device. For the device address
configuration procedure, refer to Chapter 2 “5.1 Device
Address Settings” on page 2-70.
Data is output to file when the value of Trigger Device Address
changes from 0 to 1.
Set limit on files:
Specifies the upper limit (1 to 100) when limiting the number of files to be output.
Output Alarm Level: Select this check box to output the level settings.
LDR100
LDR101
LDR102
(File Name Device Address)
4944(Hex)
4543(Hex)
‘ I ’ ‘D’
‘E’ ‘C’
0000(Hex)
(NULL)
Summary of Contents for WindO/I-NV4
