IDEC WindO/I-NV4 User Manual Download

Page: 386 / 1738

5 Part Library Function

6-14

WindO/I-NV4 User’s Manual

5.4 How to use a registered library part on another computer

To use the library part registered in the custom library on another project, save it as a part library file (*.plf), and then

import it to a project. Parts library files are per category folder of the custom library.

●

Exporting library parts

Select the category folder to export from the custom library in the part library navigation, and click

(Export) on the

toolbar.
The

Save As

dialog box is displayed.

Specify the save location and the file name, and then click

Save

The maximum number for the part library file name is 255 characters.

This concludes exporting part library file.

Export and import the parts library file (*.plf) to use library parts created by other user as well.

You cannot use periods and the following characters in the part library file name.
" * . / : < > ? \ |

Summary of Contents for WindO/I-NV4











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WindO/I-NV4

Reviews:

Related manuals for WindO/I-NV4

Brands by name

Popular brands

IDEC WindO/I-NV4, User Manual

Search results

Summary of Contents for WindO/I-NV4

Reviews:

Related manuals for WindO/I-NV4

Brands by name

Popular brands