IDEC WindO/I-NV4 User Manual Download

Page: 7 / 1738

WindO/I-NV4 User’s Manual

Preface-6

Abbreviations, Generic Terms, and Terminology Used in this Manual

Abbreviations, Generic Terms, and Terminology Used in this Manual

Item

Description

HG2J-7U

The name is short for MICRO/I HG2J-7UT22TF-B.

HG5G-V

The name is short for MICRO/I HG5G-VFXT22MF-B.

HG4G-V

The name is short for MICRO/I HG4G-VCXT22MF-B.

HG4G

The name is short for MICRO/I HG4G-CJT22*F-B.

HG3G-V

The name is short for MICRO/I HG3G-V*XT22MF-*.

HG3G

The name is short for MICRO/I HG3G-*JT22*F-*.

HG2G-V

The name is short for MICRO/I HG2G-V5FT22TF-*.

HG2G-5F

The name is short for MICRO/I HG2G-5FT22TF-*.

HG2G-5T

The name is short for MICRO/I HG2G-5T*22TF-*.

HG1G

The name is short for MICRO/I HG1G-4VT22TF-*.

HG1P

The name is short for MICRO/I HG1P-ST32*.

HG5G/4G/3G/2G-V

The format used to refer to HG5G-V, HG4G-V, HG3G-V and HG2G-V.

HG5G/4G/3G-V

The format used to refer to HG5G-V, HG4G-V and HG3G-V.

HG4G/3G

The format used to refer to HG4G and HG3G. HG4G-V and HG3G-V is not included.

HG2G-5F/-5T

The format used to refer to HG2G-5F and HG2G-5T.

HG1G/1P

The format used to refer to HG1G and HG1P.

MICRO/I

Generic term used to refer to the HG2J-7U, HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F/-5T,

HG1G/1P.

External Device

Generic term used to refer to a PLC or micro computer that is connected to and

communicates with the MICRO/I.

Device Address

Memory that is capable of storing values in unit of bits or words loaded on the MICRO/I

and external device.

System Area

Device address area that is pre-allocated for exchanging screen management, error

information, and clock data between the MICRO/I and an external device.

Device Link Communication

A communication method that performs communication with the external device

according to the setting of the screen and without a program.

DM Link Communication

A communication method that reads to or writes value to external devices using the

MICRO/I's dedicated DM Link memory.

User Communication

A communication method which performs communication with external devices such as

barcode readers and inverters.

External Device Communication Generic term used to refer to Device Link Communication and DM Link Communication.

Sub Host Communication

A communication method that performs communication with external device according

to the set device address list and without a program.

BACnet Communication

A communication method for building management systems such as air conditioning,

lighting and crime prevention.

O/I Link

A connection format that enables connections of up to 16 units of MICRO/I with high-

speed communication of 115,200bps.

O/I Link Master

The MICRO/I unit that is directly connected to external device on the O/I Link network.

O/I Link Slave

The MICRO/I units that are not directly connected to external device on the O/I Link

network.

WindO/I-NV4

Integrated configuration software application for creating projects of the MICRO/I.

Operating System

Software used to manage and control system software. Only HG2J-7U supports the update.

System Software

Software required for operating MICRO/I.

Project

Data including image data required for operating the MICRO/I, which is created with

WindO/I-NV4.

Manager

WindO/I-NV4 provides tools to manage pictures, text and script etc. With the Managers,

you can create and manage them in your project.

Setup

Generic term used to refer to the common settings in the project.

Summary of Contents for WindO/I-NV4











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WindO/I-NV4

Reviews:

Related manuals for WindO/I-NV4

Brands by name

Popular brands

IDEC WindO/I-NV4, User Manual

Search results

Summary of Contents for WindO/I-NV4

Reviews:

Related manuals for WindO/I-NV4

Brands by name

Popular brands