IDEC WindO/I-NV4 User Manual Download

Page: 721 / 1738

WindO/I-NV4 User’s Manual

10-93

4 Video Display

isp

■

(File List)

■

(File Name)

Displays the file name of the selected file. The maximum number for the file name is 120 characters.

■

(Modified Date)

Displays the updated date and time.

■

Update

Updates to the newest file list state.

■



Moves the focus up by one level.

■



Moves the focus down by one level.

■

Page Up

Moves up by one page.

■

Page Down

Moves down by one page.

■

Select

Selects the file or folder that is in focus.
If a folder has been selected, this will open the folder and display its contents.

File Name: Displays a list of the files and folders in the currently selected folder.
Size:

For files, this displays the file size (bytes).
For folders, this is displayed as

Folder

File names should be alphanumeric characters only.

Movie files that meet the following specifications can be played with the MICRO/I:
HG5G/4G/3G-V:

AVI file (.avi)

HG4G/3G:

MP4 file (.mp4)

For details, refer to Chapter 2 “1.6 Available Movie Files” on page 2-37.

Summary of Contents for WindO/I-NV4











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WindO/I-NV4

Reviews:

Related manuals for WindO/I-NV4

Brands by name

Popular brands

IDEC WindO/I-NV4, User Manual

Search results

Summary of Contents for WindO/I-NV4

Reviews:

Related manuals for WindO/I-NV4

Brands by name

Popular brands