IDEC WindO/I-NV4 User Manual Download

Page: 777 / 1738

WindO/I-NV4 User’s Manual

10-149

7 Alarm List Display

isp

■

Screen Number Setting Method

Selects the setting method for the screen numbers on the reference screen list.

■

(Reference Screen List)

Displays a list reference screen numbers and screen titles that have been set to messages.

■

Place on the Top Layer

Select this check box to display the parts on the top layer. The parts will have precedence when other drawings and

parts are overlapping with it. For details, refer to Chapter 6 “4 Drawings and Parts Overlapping” on page 6-5.

Serial:

Continuously and automatically specifies screen numbers (1 to 3000) that are at or below the

selected message number.
Example 1: When screen number “100” has been entered for message number 1-0.

Screen numbers “100”, “101”, “102”....are automatically specified in order from message

number 1-0.

Example 2: When screen number “200” has been entered for message number 1-5.

Message numbers 1-0 to 1-4 are left unchanged and screen numbers “200”, “201”,

“202”....are automatically specified in order from message number 1-5.

Random:

Specifies a reference screen number (1 to 3000) for each message number.

Message No.: Displays the message number.
Screen No.:

Displays the reference screen number.
Double clicking the cell allows you to change the screen number (1 to 3000).

When there is not screen for the specified screen number a message confirming the creation of a new

screen will appear.
If

Yes

is clicked, a screen will be created but if

is clicked, you will be returned to the

Options

screen

without creating a screen.

Title:

Displays the title of a reference screen.
Double clicking the cell allows you to edit the title. The maximum number is 40 characters.

Summary of Contents for WindO/I-NV4











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WindO/I-NV4

Reviews:

Related manuals for WindO/I-NV4

Brands by name

Popular brands

IDEC WindO/I-NV4, User Manual

Search results

Summary of Contents for WindO/I-NV4

Reviews:

Related manuals for WindO/I-NV4

Brands by name

Popular brands