WindO/I-NV4 User’s Manual
11-39
2 Line Chart
11
Ch
arts
■
Data Over
Specifies the allowable range of values to display.
Line Size: Specifies the line size. You can also specify it using the value of device address.
Value:
Selects the line size from the following.
1 dot
,
2 dots
,
3 dots
,
5 dots
Device Address: Specifies the line size using the value of device address.
Click
to display the Tag Editor. For the device address configuration procedure, refer
to Chapter 2 “5.1 Device Address Settings” on page 2-70.
Line width is as follows:
The line will be displayed with
1 dot
when the value of device address is not 1 to 3 or 5.
Line Type: Specifies the color of line. You can also specify it using the value of device address.
Value:
Selects the line color for the chart (color: 256 colors, monochrome: 16 shades).
Click this button to display the Color Palette. Select a color from the Color Palette.
Device Address: Specifies the line color using the value of device address.
Click
to display the Tag Editor. For the device address configuration procedure, refer
to Chapter 2 “5.1 Device Address Settings” on page 2-70.
Line color is specified by the color data. When the value of device address is other than
the color number, the graph is displayed in 255 (white).
For color data, refer to Appendix “Color Data Correspondence Table” on page A-1.
Preset Value
1
Line Width
1 dot
2
2 dots
3
3 dots
5
5 dots
Minimum, Maximum: Select these check boxes to specify the minimum and/or maximum.
The minimum and maximum that can be specified differ according to the data type selected
with
Data Format
. For details on data types, refer to Chapter 2 “1.1 Available Data” on page
When grid lines are displayed for the minimum and maximum, select the
Show Gridline
check box on the
Scale
and then select
Data Over
.
Ch1 data
60
Ch2 data
70
20
110
50
80
30
-10
Display
Range : Value
Minimum : 0
Maximum : 100
Ch1
Ch2
0
20
40
60
80
100
-20
120
0
20
40
60
80
100
-20
120
0
20
40
60
80
100
-20
120
0
20
40
60
80
100
-20
120
Summary of Contents for WindO/I-NV4
