IDEC WindO/I-NV4 User Manual Download

Page: 388 / 1738

5 Part Library Function

6-16

WindO/I-NV4 User’s Manual

5.5 Part Library

This section describes items and buttons on the Part Library.

■

(Toolbar)

(Library Screen)

(Library Parts)

(Standard Library)

(Category folder)

Toolbar

(Custom Library)

(New):

Creates a new category folder in the custom library. A maximum of 64 folders can be

created.
The default is "Library**" (**: number).

(Rename):

Select the category folder or the library parts of the selected custom library and click this

button to change the name.

(Delete):

Deletes the category folder or the library parts of the selected custom library.

(Import):

Loads the category folder of the custom library saved as a part library file (*.plf) into the
part library.

For details, refer to “Importing library parts” on page 6-15.

Click this button to display the

Open

dialog box.

(Export):

Exports and saves the category folder of the custom library as a part library file (*.plf).
Click this button to display the

Save As

dialog box. For details, refer to “Exporting library

parts” on page 6-14.
The saved part library file can be imported with

(Import).

(ON/OFF):

Switches between the ON image and the OFF image for parts on the library screen.

(Zoom Level): Enter the display magnification (50% to 400%) of the library screen, or select from the

following.

400%

300%

200%

100%

50%

Summary of Contents for WindO/I-NV4











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WindO/I-NV4

Reviews:

Related manuals for WindO/I-NV4

Brands by name

Popular brands

IDEC WindO/I-NV4, User Manual

Search results

Summary of Contents for WindO/I-NV4

Reviews:

Related manuals for WindO/I-NV4

Brands by name

Popular brands