30
7.5 Registration
You can register additional handsets to have up to five handsets per base unit,
with each handset's number (1 to 5) shown on its display. (Note: each handset
1. Press and hold <FIND> on the base station for more than five seconds, to
put the base station into registration mode. It will stay in registration mode
To register a new handset to your base:
2. Press <MENU/OK> and <UP/DOWN> to select
REGISTRATION.
3. Press <MENU/OK>
4. Enter the 4-digit system PIN(default0000).
5. Press <MENU/OK> to confirm, and the display will show
PLEASE WAIT
.
If the handset registration is successful, you will hear a confirmation tone and
The handset will automatically be allocated the next available handset number.
This handset number is shown in the handset display in standby mode. If the
handset registration is unsuccessful, the <antenna icon> will still flash.
7.6 Reset
Your
Phone
You can reset your phone to the default settings . After a reset, all your
1. Press <MENU/OK> and <UP/DOWN> to select
DEFAULT.
2. Press <MENU/OK>
3. Enter the 4-digit system PIN(default 0000).
4. Press <MENU/OK> to display CONFIRM?
5. Press <MENU/OK> to confirm, and the phone will be reset to its default
can only be registered to one base.)
for about 1 minute, so the following handset sequence must be completed
unchanged.
IMPORTANT: When you purchase your phone system, all handsets are
messages will be deleted but your phonebook remains
the <antenna icon> will stop flashing.
personal settings, call list entries, redial list entries, and answering machine
within this time.
already registered to your base, so you do not need to register them.
Handset registration is only necessary when you buy extra
handsets or if a handset has become faulty.
to display PIN?------.
to display PIN?-----.
settings.
