background image

43

7.3 

Store a Call List Number into the Phonebook

1.   Follow Steps 1 and 2 in the section of 

View the Call list

.

2.   Press

 

M

and 

.

 to select 

ADD TO PB

.

3.   Press

 

M

to enter the name. (See 

Entering Names

)

4.   Press

 

M

and then the selected call list number is displayed. 

5.   Edit the number if necessary. (See 

Writing Tips

)

6.   Press

 

M

and 

.

 to select the melody, and

 

M

to confirm.

NOTE

If the phonebook is full, “

PB FULL

” will be displayed. You need to delete 

some entries from the phonebook in order to save new ones.

7.4 

Delete an Entry in the Call List

1.   Follow Steps 1 and 2 in the section of 

View the Call list

.

2.   Press

 

M

and 

.

 to select 

DELETE

.

3.   Press

 

M

to confirm.

7.5 

Delete the Entire List of the Call List

1.   Follow Steps 1 and 2 in the section of 

View the Call list

.

2.   Press

 

M

and 

.

 to select 

DELETE ALL

.

3.   Press

 

M

to confirm, and

 

M

again to re-confirm. 

7.6 

View the Details of the a Call Entry

1.   Follow Steps 1 and 2 in the section of 

View the Call list

.

2.   Press

 

M

and 

.

 to select 

DETAILS

.

3.   Press 

M

, and the date and time of the desired entry is displayed.

Summary of Contents for Loop Plus



























































Reviews: