“Last Number
Redial and/or
memory dialling
don’t work on
a PBX.”
When you first make a call, after keying in the outside
line access code (e.g. 9), press and hold the
Last
Number Redial
button until a
P
appears on the display.
This inserts a
pause
between the access code and the
telephone number. You should later be able to redial
the number.
When storing numbers in memory, you can include the
outside line access code
(e.g. 9) with each number.
If your PBX requires you to wait for a
second Dial tone
before dialling the telephone number, press and hold
the
Last Number Redial
button for a pause
between the access code and the number.
If the fault persists …
Disconnect all other instruments
connected to the
same line as the iDECT X2
i
and see whether you can
make a call.
Disconnect the base unit
from the telephone line and
plug a different phone into the master telephone
socket. Try making a call. If this works, the line is OK.
If the call does not work, and you are using a
two-way
socket adapter
, remove it and plug a telephone
directly into the socket. If the call now works, the
adapter may be faulty.
If you cannot make a call, the fault may be on the
exchange line
. Contact the service provider (the BT
engineers on 151, or your cable company).
If you still cannot identify the cause of the problem,
contact the
Help Line
on
0845 345 9677
.
Troubleshooting
52
Color profile: Disabled
Composite Default screen
